Search results

I am old school , I think I started at the Kawi dealership in 1986 , I was 23 years old when I rode my first standup , I worked at the Honda dealership for 4 years before that , but I also like to keep things simple , to me a 44 adaptor plate is simple , effective and it works well on both...

Yup unless you have a bunch of JIS screwdrivers laying around , these Vessel impacta screwdrivers are the shizznitt when you strike them on the end they rotate about 12 degrees but honestly on stuff like Mikuni jet plate screws it usually turns them right out, why you ask , because those are not...

I have no idea how that got there , I must of fat fingered it, but I fix it

I have run 44's on every 650 I have ever had in a standup , they always start and run great and the jetting is pretty well known , unless you don't jet it properly it's really hard to go wrong with one. Most of the time I use a stock intake with an adaptor and it works great. you just need to...

Amazon deals : There were more of course but I posted the ones I thought were really good deals the two torque wrenches are excellent deals ...

Lowes Black Friday deals : https://www.lowes.com/pd/CRAFTSMAN-159PC-Mechanics-Tool-Set/5014463527?irclickid=RHex3XRXHxyKRur2PPS1fTBYUkCToYWzh0eBR80&irgwc=1&cm_mmc=aff-_-c-_-prd-_-mdv-_-gdy-_-all-_-0-_-3006986-_-0...

Is this what you are looking for ? https://www.x-h2o.com/threads/oem-style-airboxes-for-44-46-and-aftermarket-carbs.209084/

I am trying to get all the customer stuff wrapped up right now and then I will get back on these sales skis , as long as I have five or six ready to roll by Spring I should be good .

I was doing them for around $75.00 for Yamahas and Kawis when they were dropping them off at the shop , I think I got around $110 on Seadoos with jet pump oil change , To me $150 per to show up on location and do them sounds reasonable , it's convivence store pricing if you want a cold drink...

I want some thoughts here , to preface this I am in the dirt poor deep South Alabama so keep that in mind , I realize in other parts of the world people can and will pay a lot more . I have been charging $110 to show up on site and winterize jet skis , two jet ski minimum , I can't do that for...

https://www.bing.com/videos/search?view=detail&q=hello+adele&mid=F66E0A9F1D2EFB564785F66E0A9F1D2EFB564785&FORM=VIRE

I scuffed up the driveshaft tube with 80 grit, then cut enough glass to get two full wraps on it, I saturated the glass with epoxy and wrapped the tube, then I wrapped the tube up in about 5 turns of saran wrap and squeezed out as much resin as I could , again another part that will never be...

Maybe I need to just bite the bullet and buy some of this , I have been wanting to try it out for stuff like seat bases and handlebar pad bases , there is a lot of stuff out there needing those type of parts right now , especially the type of plastic Yamaha uses for their sitdown seat bases...

I can't really tell how much the top has spread out , it has been apart a long , long time , also I don't know how stressed it would actually be , it pushes in fairly easily , I can try heating the bottom up using spreaders and see what shape it comes back to when it cools down and relaxes , at...

This one I can vouch for 100% I have had very few issues with TEMU and I have had this Kimo ratchet for over a year, it has worked flawlessly , this listing is about half the price I paid for mine last year...

I love the blue ski BTW , really nice color.

A 62T cylinder EX port height comes in around 39.48 from the top of the cylinder , a 760 comes in around 37.42mm so basically 2mm higher , even the 760 still has a slight lip at the top and for sure you don't want it any higher than a 760 cylinder. Any part of the exhaust port that protrudes...

It's raining here today so not much happening , out of curiosity I did some measuring , the widest spot on the ski is 24' from the back of the hull , on the bottom deck I get 24 1/4" , on the top deck inside of the bond lip I get 26 1/4" , so yeah that's pretty much why it doesn't fit together...

I HAVE TO PREFACE THIS WITH THE FOLLOWING PLEASE READ : I have no idea if this is a real, legit company or not , I tried to do an internet search on them and I came up empty , absolutely nothing , zero, zip , nada , it looks to be a site like TEMU , at the moment I just don't know , as always...

Making this one today : Crockpot lasagna: Lasagna noodles , cooked hamburger meat 1lb browned ricotta cheese , I am using cream cheese mixed with Colby Jack and Mozzarella , you can also use cottage cheese spaghetti sauce , I am using homemade sauce today but any brand of sauce will work I...