Search results

The Ballistic battery is not the same type of battery as a lithium computer battery and will not catch fire . The catch on fire thing is a myth .

On one of my Cast Dasa motors which is 8mm stroke 81mm bore with b pipe ltd chamber has 140 hi. 130 LO , Novi 48s on Dasa manifold with VF2s. 2.3 ns and 115 springs. I would start with a 150 hi jet and work down from there. It's easy to figure out if it's to rich. This jetting on t...

My 09 Superjet hull took a while to get dialed in. I was using handling parts off my 2000 round nose and that was part of the problem. Ski was to nose heavy even for bouy riding. It came down to getting further back on the ski . I had been using a 24/7 lowered bracket that was also 1 inch...

What is the best coil replacement , for twin coil type ?

You have been having MSD problems since at least 2-29-12 from the date on you MSD thread . What does EME say about this ?

Be carefully not to over tighten bolts , and make sure bolts are not to long because they will bottom out. I reinforced one of mine with plastic weld around the mount area . It had a tiny crack from over tightening a bottomed out bolt that was to long .

Ive had a few over the years . Picked up an oneil last fall and its great . The suit is neopreme up to chest and nylon upper with zipper accross back. Seals are thick and dont strangle me like some suits of past did . I have ridden every weekend all winter in N.C. except thanksgiving . Got it...

Time for a new head gasket.

Some parts will surprise you . Dasa billet intake was a 1/2 lb lighter than the riva cast . Solas props are around 1/2 lb less than skat swirl or hooker .

When the waterjackets are full it will be heavy . Seems like when I weighed a type 9 pipe a few years ago it was around 10lbs heavier than a B pipe .

From reading on the Japan Solas site they have one for an SXR and a couple of other skis . I hope it wont be long before we are seeing these show up .

I followed a link to the Japan Solas site . The leading edge of blades look like a Dynafly on the outer part , then midway of blade it cuts in at about 30 degrees to the hub .

Back in 93 or 94 rick roy had a mould of superjet bottom fastened to his tote so ski sat down tight . Also had the first footholds in his ski . Looks like Solas has a new impeller in the works from a picture I just saw . The leading edge of blade looks like a boomerang .

Hybrid ceramic . I use them in the carbon fiber wheels in 2 R6 sportbikes . The front wheel will spin for over 6 minutes without stopping while bike is on stand . Stock bearings the wheel goes about 6 revolutions before stopping . That is what convinced me about hybrid ceramic bearings . I have...

Ran the 12 cell in SXR Dasa with total loss with 240 psi. Probably cranked it a dozen times in the process of riding out a tank of gas. Battery still had 13.38 volts after all that. I'm sure it will go 4 or 5 tanks on a charge.

I have an 8 cell and a 12 cell. They have both lasted 1 year so far so good .

Ive been using them for years in pumps , bearing housings , and motorcycle wheels and have never had one go bad . Also they are not $200 each at world wide bearings .

Didnt know it was made by SBT until googling the serial number on it . Bought it from a forum vendor . Now have CF housing and a just ordered a CF shaft an hour ago .

$1260 to the front porch for pump . Will pick up another fresh driveshaft soon . One of the things I prefer about the Kaw pumps is you dont have to have the driveshaft with each one . And there is no midshaft to deal with . I just sheared an SBT midshaft into 2 pieces . Dasa power .