Search results

Those hills are close to 6 miles away! The very smallest one a little left of the center is a volcano that 10 miles away. Just a smidgen over the maximum range. Can ya name that machine gun?

Today is the last day that this is my view!

I use these a lot too. I love the 3m roloc disks. I use 3 inch disk on 2 inch base so the edge is flexible. 24 grit is my favorite.

what a slob!

I just requested for a quote for a pole barn house. 1600 sq. ft. with a 1000 sq. ft. of garage with a 600 sq.ft.apartment. It would be the ultimate man cave, id have a tap in every corner!

I'm working on buying a house just for a garage. I don't even care what the house looks like as long as it has more room for my projects to be organized. Last rented house only had a shed so the kitchen was the work shop.

Dont ever be afraid to use a grinder, especially on something thats getting turfed. The surface finish doesnt matter as much for areas getting turfed As long as you dont dig in deep (gouging and making surface uneven), going threw the gelcoat is fine. Your gonna want to hit all the areas to be...

Love the splatter effect!

I burnt up a dremel using it to cut fiberglass. Then i went to a angle grinder with a 4 in cutoff wheel, and id never go back.

You could always use an air chisel, ive never had anything argue with an air chisel for long lol

There is a thread for Ratski the 440/701 http://www.x-h2o.com/index.php?threads/ratski-440-701-conversion.174682/ the 550sx doesnt have a thread yet, but i will do one. Its my heart and soul. Its my first ski and ive had it for like 15 years.

I picked up a 750sx pump that was super clean with a solas 13/18 for $175. My 440/701 has the 440 pump and its just cant handle the larger engine, even with a 21 pitch. This 550sx should be awesome, -2 rear, chine mod, chopped pole, ported 701, 750sx pump, and best of all... rear exhaust. That...

awesome, thanks for your help

This isnt a debate thread on if it should be done. Thanks for everyone's input so far.

http://www.ebay.com/itm/Kawasaki-650-SX-X2-Exhaust-OEM-Pipe-With-Clamps-Couplers-in-Nice-Condition-/252737524973?hash=item3ad85494ed:g:47cAAOSw44BYhnRP&vxp=mtr Is this what you run? The bolt pattern looks the same as the 701 exhaust mani but it has water jackets.

Cool, ill look into the 650sx cheater you have. I dont need anything crazy, just something with a tad more hit that the stock exhaust. Kawi and yami have the same head pipe bolt pattern right?

I haven't tried bagging material. The wax paper thing was something random I tried because I got tired of cleaning rollers. It does leave the wax behind but it is such a thin layer so it never bothered me. The surface get sanded for whatever the next stage is anyways. I do wanna step up my...

Here is an example of using chop strand for finishing. I only wet out the area I need it to bond too and grind the excess off after it cures. The second pic is after using a air grinder with 40 grit. In your case, I'd hit the back with a air grinder fitted with a 3 inch 40 grit disk to...

I myself have used yards and yards of mat with epoxy for many different applications. It's not hard to wet out with thin epoxy resin (which should be used with biax as well). There are different weights mat just as any fiberglass, and the heavier, the harder to wet out. I just like the way...

I was gonna try to use a 701 mod b pipe because that's what I have. Is that a 701 you have the 650sx cheater pipe on?