Search results

People are very happy with them so far, only a few issues that have been resolved. The weight is great, but the size is really what I'm after. Even an ETX9 is going to be a challenge to mount in my ski. I think I'm going to pull the trigger on an 8 cell today unless someone talks me out of it.

Keep us updated! People are really happy with them, you will definitely be putting it through a good test.

While battery shopping, I started to wonder about something: A lot of you are running the ETX9 with no problems, even with TL. The specs for the ETX9 are 120cca and 8ah. Why when someone goes to a LiFePO4 battery like the Shorai or Ballistic do they go for a much higher rated battery...

My ski had it like that and I found no point in it at all. Why put thick padding where you don't stand and thin padding where you do?

:shocked: Wow. Some crazy carnage there. Lets see a pic inside the hull where it ripped that plate out. Get her fixed up. You have 3.5 weeks till Grayland.

First off, you really need to run two straps. Yes it's tight getting to that one next to the tank, but if you can't get it by holding the rubber and stretching and fishing it down there, get a tool to do it for you like THIS ONE. Second, like suggested above, your straps need to be TIGHT...

I have a Nook Color ($179) that I run CM7.2 on. I really like. Not saying it's the same as that Touchpad, but it does all that stuff you listed above just fine.

My PFP outlet is dead on 2". EDIT: I should clarify; I believe my pipe is older and has a resonator, but I do not believe the dimensions changed. EDIT again: Here's the hose list from PFP PowerFactor Silicone Hose Kit Includes the following 1 Black Silicone Hose, 4 PLY, 3 inch 1...

I wonder if it's possible that you are running lean (causes more deposites), then you ingest a little water and that cleans your pistons off and the deposits get stuck to your plugs. Maybe it's unlikely, but I guess it might be worth taking a look at. Maybe pull your head and take a look at...

Has anyone looked at Sweet Helmets Fullface Rocker? A bit spendy at $399 http://www.kayakshed.com/sweet-helmets/sweet-fullface-helmet?CategoryID=24

I have a used UMI pole setup for SXR if you are interested.

Haha, just gave it to Dave. He's going to TIG it all up for me in the next couple days. I don't plan on making more any time soon, would be a good winter project though if this thing works out.

Kickin ass and takin names....well maybe not. You know how it goes Kevin....on this thing, it really seems like I take two steps forward, one step back. Still mostly making forward progress, but it's been slow. Also, Summer finally hit here, so the wife has wanted to Grill, have friends over...

Good question. The box will be laying at a bit of an angle in this SXR hull (the hull sides are not straight like a SJ), so the exit is between the carbs and the hull. Since everything is at a 45* angle, the outlet of the box will have a 45, a straight length of pipe, a 45 that angles down...

Do you have 2 100% separate coils, or one coil that both wires go to? They have done both, that's why I ask. If the later, it's only one coil and uses the waste spark method, so both spark at the same time, at TDC and at BDC. One wire is the power, one is the ground (sort of, basically it's a...

The topic about sufficient protection has come up in the past. Many have argued that a bicycle helmet is insufficient for our use as well and said you NEED at least a full MX helmet, Better if it was a DOT helmet, and Best if it was a Snell helmet. To each; His own. Do a little research on the...

Alright, picked up the AL Friday, most of it cut to size, $20. Spent 2 hours making the holes, cutting the tube, then fit up. I ended up with a different design. I did a single baffle design similar to stock and A/M boxes. I did change the exit so it ends above the bond line, then when I...

Looking for o-ring ID and thickness for the Power Factor Pipe. I assume Viton (400*F) or Silicone (425*F) would be fine. I took measurements off the pipe, but left them at home. Looking to place a McMaster order today.

I have some 3ish" tall Renthals if you want to try something taller, $20

The 2 on the manifold are water in. It is designed for use with dual cooling were you add another fitting to your pump to supply your engine more water. Depending were you live, this might not be necessary. If you only have one pump supply, I'd just get a T fitting and split your inbound water...