Search results

  1. R

    Completely flat trailer - Yay or Nay?

    i use 3/4 pressure treated plywood. had a trailer for 12 years with no problems .
  2. R

    62t Electronics on a 6m6?

    chuck,have your tried the new tbm wheel with a vilder cdi?
  3. R

    Peugeot in the jet ski market

    peugeot is a better product than ford ,chevy or chrysler. lower cost of manufacturing,lower warranty claims,etc...
  4. R

    Blowsion finally came through, but i have 2 questions...

    listen to supertune. he's only been doing this for a million years.newbie!
  5. R

    Do you bake salt into your cylinders ?

    you mean i have to rinse the life jacket as well?:omfg:
  6. R

    Watedawg Kustoms

    last news i got was the pipe will be available fairly soon. stampings had been made and the welder was to do his magic!
  7. R

    Do you bake salt into your cylinders ?

    the salt would dissolve in the water again.
  8. R

    SX/SXi/SXi Pro Q- MSD Enhancer for a 99 Kawi 750 SXI-Pro

    they are not advanced stock contrary to what you were told. you can run advance plate plus enhancer but msd then recommends the timing module to pull some timing back at higher rpm's. used that combo on a 2001 with 217psi and 50/50 pump and c12 with no problems ever. still pulled like a...
  9. R

    both shafts are toast!!!

    some boats don't have any shims so it could also be just normal wear!
  10. R

    Yamaha engine mount washer shape?

    because they are cheap. with the metal saved they can make a free washer!
  11. R

    Pump seal not sealing against pump shoe

    if the gap is 1/8" you should try to reposition the shoe. something about the shoe is different if the pump doesn't line up like it did with the oem one even if the grate bolts line up! last thing you need there is an air leak. you shouldn't have to use more shims as you now probably have a...
  12. R

    little help with WCF

    nothing like lasik!
  13. R

    Pump seal not sealing against pump shoe

    how much do you need to move it back?
  14. R

    Fiberglass still tacky

    all you can do is remove the soft stuff by scrapping or with acetone and re-do it. don't lay stuff on top as it may never dry. you could try some heat lamps on it for a little while to see if it helps as well.
  15. R

    little help with WCF

    that's cosmetic carbon. pull it or cut it off and ride. you also have a loose nut on your trim system and the plate screws are not the right ones btw.
  16. R

    Dent in top of Piston?

    put a little jb weld in there.better than new.
  17. R

    who feels my pain?

    bruised ribs hurt like hell. hurts when you sneeze,cough,pretty much anything you do ,etc.. it's been 4 weeks now and good enough to ride but barely.sometimes felt like a virulent lung pain also. good luck.
  18. R

    this is how we roll, lol

    keep the skis in the car but put the wide shouldered guy on the trailer instead
  19. R

    cheap fire extinguishers????

    flares? i thought the whistle was sufficient!
  20. R

    cheap fire extinguishers????

    i'm like you as well.:biggrin: just figured i'd mention it before a peep asked.
Top Bottom