Search results

to be clear, I meant you'll notice a difference with a new set compared to those if you dnt clean them inside and out.. for example, as ajmps1 mentioned, look at these crustaceans i had, but they were all mechanically functional. i actually used these crusty ones for testing because these...

yes chix those look like the salt crustacean carbs I had from a salt bathed seadoo! you're going to notice a big difference, considering you've basically been driving that ski on around 1 carb.... whats the delivery date on the carbs? As far as the title thing is concerned, I get that alot of...

So when you buy a hull from Krash, or even a fully built ski, they don't come with titles?

I know mine looks like jordanh 's too. I've never seen one that goes straight into the left tube of pole. jordanh , will that cause an issue?

love it! looks great!

Ahh, when you said the "Yama-doo" thing, I thought you frankensteined some parts from a Seadoo. That steering nozzle looked similar to the three Seadoo nozzles I have hanging on my wall. (X-4 is the hull design for most late 90's SD 2 strokes, most of the parts also fit on my HX)

meaning, after you pulled the motor? just curious to see what it looks like under where your motor was. i think there is supposed to be a foam pad that is glued under the motor, but i dont have one. just curious if they all came with one and mine was removed, and if there is supposed to be one...

any word on this? are you going to rebuild/replace the motor? any pics of the inside of the hull?

Kaylee, so did you just use a standard X-4 steering nozzle? Did it bolt right up to where you needed it, or did you have to make any modifications to it?

So, is your permanent start/stop switch installed and are you up and running?

hope this helps! good luck!

chix, I think you're on the right path. I did some research and a "Bad/Stuck Starter Solenoid" has absolutely caused this problem in other applications. This is a convo regarding "negative terminal on battery arcing": "This is going to be a stuck starter solenoid (aka starter relay), it' got...

@hondamatt450 no, wasn't a joke in the least, just a serious, practical question. if you read the first line of the post, you'd understand why I asked. I was tightening the clamp the night before around 1am and thought I heard an unusual noise. called it a night and then left for work in the...

Hey chix, I know that engine sat for about two years.. Was it fogged before it was stored and did you fog it/spin the pto by hand before firing it up for the first time? I ask Bc at least from what I saw on your first start up video, it didn't look like there was much smoke, if any..

I commend you! You are the shizz.. I know all bout them late nite early morning tinkerings and then can't start it or use power tools until the next day Bc of noise! But yes cannot believe how much you got done.. When you said it took on a lot of water with the scupper only, how much water was...

yea I noticed the pole sits totally flat from the factory. not sure if they all kawis and sj's do, as mine came with a modified 750sx pole spring so it helps a bit... but I can see it becoming fatiguing after a bunch of laps.

Yes, please post the vids and pics! and let us know how it rides! Isaw it sitting in the water in your sxr vid, and I thought, either someone you ride with has the same one, or you finished yours and splashed it! congrats! (who's SXR was that?)

I'm guessing with these bigger/more powerful engines and carbs it's not an issue, but on two separate stock 717's both with dual mikuni sbn38's, both setups only had the one pulse line, and one setup had the factory pulse line, maybe a few inches long with no elbows,90's etc in it, and motor ran...

Hey guys, disclaimer..this isn't my ski, but im posting from work and hoping to stop somewhere on way home to pick one up...Does anyone know the EXACT size of this hose clamp? like if I walked into the hardware store, what should I grab/ask for? I Don't want one that "could" or "would" work...

that's awesome that you lost 20lbs. in how long of a period?