Search results

Its more but i dont know how much more. I dont think it even needed more to be honest

" NOW WITH TACOS" There is a new version of zeeltronic coming out. its smaller with a bigger spark and a taco out put "We have new PDCIS-A02T which accept original flywheel with one short and 2 long lobes. " So you dont even have to grind the small lump off anymore. Pretty cool, Its a little...

Yup every one is very busy at the moment. Its crazy but also good.

The way they angle the air/fuel mixture on them loses hp and pushes the mixture all to one side of the reed block. I flow benched one with a smoke machine back in the early days when I was young enough to be compeitive on the race track

I would find a better manifold if you can

Is it the narrow to wide intake manifold you have on the superjet ??

Thats very simillar jet specs to what I run but your main jet is to big. It will load up mid corner when you gas it. or when cruising then gas it. I run identical with a 110 high. Im going to say to you to run a 115 high. Im on a b-pipe not a type 9. The type 9 will pull harder on the carbs up...

Will it go in my fx1

I wish some one made the setup with the ability to put the mixture screw on either side. This would make dialing in so much nicer.

Looking for an intake manifold for 46s to my 62t cases, Just building a new surf engine as you do. what do you have and will you ship it to the gold coast of australia

I didnt want to wot it on the trailer but i gave it a bit of throttle

I was expecting 13 -13.5 volts. Ski wasn’t charging and the battery went flat. So had a look and saw a dodgy wire on the reg. Thought when I checked it after that it wasn’t charging still. Maybe it is now and it’s just never much

I don’t think it’s the zeeltronic as the charging circuit is seperate. Mine is a new one as well. So low current draw.

Hey can anyone out there in Zeel land please put a multimeter on their battery and see what they are charging at. My battery went flat last time and I am a charging system. I put a whole new front cover etc and regulator but i dont seem to be puming out many volts into the battery Cheers

jetmaniac

its a scan I converted it and now its a solid, drew from a scanned stl by putting on faces

Something like this you mean, it was taken from a scan

I don’t think my scanner is all that great either

Yes iI have done the ocasional cad work my self. I have played with geomagic myself to try and take the parts from my scanner to working drawings, it is a major operation. I think people think you scan straight to a working drawing but its not that simple