Search results

exhaust too right?

might be easier to try to do a homebuilt? those loopholes are closing...

never shipped to france before, but I can try to help you. send me a pm.

I have seen a number of skis including one or two of my own where the plastic cracked and busted off. I never found the piece on one and epoxied the other back on. I'm sure they will take my word for it ha ha. lucky there are more than one on the ski. what if you break your hull in half and...

no that prop looks fine, you might want to regrease those bearings though!:biggthumpup:

are you changing the filter? make sure the siphon is on the bottom of the pan. until you get the oil clear I would run it as little as possible to avoid damaging the bearings and oil pump. you need to run it to warm the oil and get the water out but just long enough to mix it up. then change...

not a whole lot since I have to weld 2/3 of it back up properly. pm me a price and I can get you some paypal. I need one for my blaster. but I am just too broke to do it up right.

good thing is that hull is made of glass and can be repaired. plus its all in the nose and not somewhere like under a motor mount. its gonna cost but it can be done. I would read up and do it myself.

you mean the water sits on the bottom, right? I'm lazy now and just sipon off the bottom, if it seperates I keep going til I get just fuel. yes it should all go in the trash, you also can sometimes have fuel sitting in the fuel pump of the carb, so don't forget it can still be there even if you...

wanna sell it? I see that back corner has been welded up before as well.

very nice pipe and tank, thats it!! I have to make a pipe. now if I could only make the manifold and head pipe id be set.

if you plan on using 25mm padding when you turf I make footholds to allow that without losing any room for you foot to fit in it. http://www.x-h2o.com/threads/49330

very cool, I am putting it off til I have some more time and beer money to get some quality help. :afro:

lots of times you will find water in the tank and carbs.

if you have trouble getting them I also make them.

I had the same issue sat, its probably water in the tank and carbs. its a common problem.

I might have some in the parts pile.

its flotation foam, it is tons of bubbles stuck together. 99.99% of them are intact and hold no water. so the sticker is no issue if you pour some of that foam out and hold it under water overnight it will absorb no water. of course there are some that are open and hold water but its a...

neither- try again. if that is trying to be camo add the white to it.

making digs is no help. I would rather find out why his hull or friends is giving him issues and try to fix it. at least he took the highroad. You guys just have to understand that riders outside of our group are not really used to the sarcasm at the level we keep it at. besides you...