Search results

I might be looking for a new motor next year, what's the general view on the xs12000 and DASA1200? I will be running it in am XFS with PFP, Mag, TL etc. Anyone tried them back to back? What are the Pro's/cons of each? I've had a 6mm DASA (cast cylinder) and XS1000 before - current is the XS...

Changed two bendix and couldn't work out what was going on so sacrificed a stock front cover to hold the bendix on so I could check: http://i149.photobucket.com/albums/s57/Janker_2007/597ef86be4f79d5e8311c0e43ee0281e.mp4 Never seen anything like this before! Understand the MSD now pin these...

I have a stock tank that sits too close to an adjacent mounting - can the OEM tank be heated with a heat gun and reshaped a little to clear it? It a none standard application so it's the only option short of fitting a different tank. Thanks Jim

Can someone help me and drop a ruler on the regular bolt hole distances on a stock hull please - I need to work out of there the same as mine (on a aftermarket hull) before I order a regular ride plate. TIA Jim

Can anyone show me some pics of their FP Dry Pipe install please? Thanks! Jim

As per title - what corners the hardest? I have a Wamiltons all carbon B1 I'm building and looking for the best parts for carving/running bouys?

Are SJ and Wave Blaster 1 ride plates the same?

Can a SJ ADA head be used with this pipe bracket - or do they do an equiv? My Riva red pipe bolt to it hence the need.. Thanks Jim

Short video from today: http://www.youtube.com/watch?v=WJfYRdC-mh4&feature=youtube_gdata_player Jim

Might look to take my ski on the salty stuff this year so needed to box the MSD following a failed brain. Wanted the Power Factor MSD box - but not the $2k price tag - here's what I came up with, thought I'd share to help out other members: Sheet of 1/4 sheet of perspex $8 IP68 Glands x8...

What are they worth used in very good condition? Jim

Which of the following are the same on a 650SN & 701RN Please? Engine mounts Elec box Midshaft Crank Drive shaft Thanks In advance.

New ski for me - had my Jet since 2004 and thought I'd move to an XFS RRP Pole: Loki Titan Micro Steering Riser Bars DASA 7 port motor: 6mm Billet Stroker Crank 48 mm Full Spectrum Carbs Boysean Manifold with Triple Stage Reeds MSD Digital Total Loss: Power...

What length are the RRP tubes your running? I'm looking to preassemble as much of my ski as possible before the hull arrives - if you could put a tape measure on yours I'd be grateful so I can check mine are ok before I pay to get them anodised! Cheers, Jim

Picked up my first Jazz which arrived a couple of weeks ago - how do you attach the pickups etc? The header flap is fitted - but a 'how to' on the rest would be great? Thanks in advance to anyone that can help me? Jim

As per title really, ADA Head - Dome nuts, what size are they, need to order some more as the cheap standard chrome ones have started to rust? Just need to know the thread or nut size please? TIA. Jim

Anyone ported/ground out the header pipe to Match the cylinder for a PFP - mine seems miles out!

Looking to glass some brass threaded inserts for tank/battery straps into my new XFS - what sort of resin/cloth shoukd I be using? Polyester/Epoxy etc? Any other advise/tips? Thanks Jim

Could someone kindly post up or pm me the DIMS of the PFP water box - only need length and width so I can fabricate a battery tray whilst I wait for the pipe to arrive from Thrust. Thanks in advance.:bigok: Jim

Approx every how many hours do you need to strip rebuild an XS1000 running a PFP?