Search results

I currently have the typical rubber coupler, but it flexes too much to keep my carbs perfectly in sync. This looks better: But I am not sure where I can buy one. Aaron

I've got a 8mm stroker crank that used Kawasaki rods. I don't have pistons or an upper end bearing. The ID of the small end of the rod is 24mm. Is that a big pin or small pin? Thanks, Aaron

Is the pop-off pressure when the needle first pulls off the seat and barely starts to "leak" or is it when the spring collapses 100% and the needle is almost completely blown out of the seat, or is it some point in between? Aaron

WTF!! I am furious. My crank let go back in October and I didn't miss a beat getting parts shipped to "capable" shops to get it repaired. I should have just sent the whole thing to Chucky at X-Scream, but I tried to save a buck and sub-contract the stuff out myself. I ordered Wiseco...

I was looking at the 650SX resto-mod on Group-K's website and noticed that as they increased the mods they increased the oil ratio. What's everyone running for oil ratios? Aaron

http://64.233.179.104/translate_c?hl=en&u=http://photos.yahoo.co.jp/ph/hopeooohope/lst%3F.dir%3D/1ba0%26.src%3Dph%26.done%3Dhttp%253A//photos.yahoo.co.jp/ph/hopeooohope/vwp%253F.dir%3D/1ba0%2526.dnm%3D98b5.jpg%2526.src%3Dph%26.view%3Dt Cool. I like the foot plates. The exhaust looks like a...

We are planning a trip to Broken Bow Lake in Oklahoma this summer. I am planning on taking our Sea Ray and (at least) two Superjets. The lake is pretty large and I'm sure we'd like to cover a few parts of it, riding the stand-up across the lake is tiring and uses a bunch of gas. What would be...

So I am putting Christin new ski (Sjetrider's old hull) together. I want to run stock flame arrestors but they hit the head. I trimmed them some, but the opening was still right up against the head. I think Blowsion or Wamiltons makes a spacer to allow them to fit but its $$$$. So I grabbed...

So what is the pole math? How do I know if I want or need a shortened pole? Is it height? or weight? Probably both, but do light people want short poles or do they want long poles? I assume racers usually want stock/long poles as I see them hanging their asses off the back of the ski, but...

FIrst I have a 5mm stroker motor built by Chucky/Supertune about 4 years ago. It's AWESOME and I am probably stupid to try and change it...but... My crank let go at the end of this season. Like a dumbass I sent it to Pro-Tec to rebuild it instead of just sending the whole thing back to...

I need some bigger domes for it, but I don't know what it is yet. The domes are cut for o-rings, but the head isn't. Instead it uses a plastic reusable gasket. There is no logo on it at all. It came on a motor I bought off EBAY. The motor is pretty interesting so far. It has 6M6 cases, that...

I won this on Ebay today: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=200186004367&ssPageName=STRK:MEWA:IT&ih=010 The seller said the motor was from a close course race ski. And was built as a spare motor for the team that got dyno'd but never used. Anyway, what is...

I haven't posted in a long time. Been busy. Have a 2 month old baby boy at home, been playing mister mom in the mornings and working in the afternoons. No time to read the X. :( I got a few spare minutes tonight so ATS_Scott and I headed to Lake Lewisville. After about 20 minutes of riding I...

Titling boats in Texas pretty much sucks. I bought an 05 Wammer and I am not sure how Texas Parks and Wildlife is going to react. I bought it used, not directly from Wamiltons. The really isn't a HIN number, just a serial number. I have a bill of sale from Kansas, but Texas wants proof of...

I managed to fix my stator problem this morning (I'll put that story in my carnage thread) and we took seven stand-ups out on Lake Lewisville. All the boat ramps are closed, so we found a park (like play ground park, not boat ramp park) where the water was close and used beach carts to get to...

I was cruisin yesterday on the new Wammer ski...and then it died. I didn't know what happened. I hoped I didn't seize it. One compression test later we found the motor was OK, but no spark. I swapped the advent for a stock 6m6 CDI I had laying around, still no spark. I swapped the coil with...

This thread is really for ATS_Scott, but he is trapped with his wife at Ikea right now so he can't ask. We ride 99% flat water. Over the winter he Sport Ported a 650 6m6 motor and then at the last minute decided to bore it to a 701. It ran well, but he yearned for more power. I recently...

Like this: Who sells them (for under $20)? Aaron

A friend of mine went to Nashville today to pick up the hull I bought from him and I can't get him on the phone. I have his cel phone number, but it just rings and goes to voice mail. His work number doesn't answer either. Does anyone have a home number for him? Aaron

I broke 'em. Everyone one for them broke off flush with the head pipe. I bought it off Ebay over the winter, no idea what the positions are. I seriously suck at drilling them out and know I will just make it worse. Is there anyone on here that would be willing to fix it for me. I'll pay you...