Search results

So about 12:45am this morning Christin and I were just crawling into bed when I heard a bad, bad noise. Earlier today (technically yesterday) I towed my 785 Pro to my house because RedlineR6 (from Green Hulk) was on his way from Iowa to pick it up. I parked it in front of my house, lots of...

I am working on piecing together Sjetrider's hull for myself. I am using a 1992 SN hull as a donor. Sjetrider mentioned that the intermediate shafts and housings are different between the 92 hull I am using and his 97 hull I bought. Anyone know if I can still use the SN one? What's the diff...

We went out for a couple hours yesterday. Before we left I snapped a couple pictures of Scott and Matt's squarenoses sitting on my trailer. Scott's is the 93. It has a 6m6 with GroupK ported cases, 6M6 cylinder with sport port + bored to 701, B-Pipe, OP air filter, OP scoop grate, and a low...

I don't know what it's called when you ride the ski sitting up on the hood, but I have always thought it looked cool. I tried it once last year and of course, had the ski shoot out from under me as I rolled off backwards. I tried a couple times 2 weeks ago and the nose always seemed to go...

http://www.x-h2o.com/threads/16845&page=2 Bobby advertises a Coffman pipe (for a Wave Blaster) for sale, posts pictures of a complete setup, we agree on a price, then he sends me just the chamber. I posted BEFORE he shipped it that if it was just the chamber that I want my money back and...

Will a SN steering cable work on a RN? Aaron

Did I hallucinate this story? Something about a pro rider who raced a yellow SJ with SeaDoo sticker on it? Thanks, Aaron

I traded for this cylinder today. What is going on? It looks like it was ported, but then had sleeves installed, and the sleeves don't match the porting. It has been run in it's current configuration. The story is that it used to belong to Slymo. Should I run it as is (after a hone) or should I...

I am so frustrated I can barely type. This 1985 JS550 is driving me nuts. I bought it from a friend who said it needed a new charging coil. He had bought a charging coil, but damaged it while installing it. I soldered the tiny broken wire together and installed it. I got it all back together and...

I just found out the guy reserving our house never did it. Scott and I got no place to sleep. Anyone got some room? Aaron

I put a Riva red pipe in a stock 93 SJ. Any idea what I should do for the carb jetting? Maybe same as a B-pipe? Thanks, Aaron

I ordered a 2.5mm spacer plate. I should have measured it. I paid to have it bored to match my cylinder. I should have measured it. I installed it and assembled the motor. I should have measured it. I checked compression on the complete motor...135 psi. It should be nearly 200. I wasn't sure...

I don't know how well it work yet, but I bought one of these today for $80 at Lowes: It assembled in ~5 minutes. The side rails are removable (I didnt' install them). We are installing the bunks tomorrow. The tires are only 4-5 inches wide, but there are 4 instead of just 2. We'll try...

I am trying to find an intake manifold that fits the spacing of my 44mm carbs I got from Skinnyman. The R&D intake is spaced too tight. I think I need a Riva, but it might be spaced too far apart. Was there a Yamaha that came with 44's stock? Like a 760? I think the GP800 has the carbs turned 90...

I need to get a set of stock wrist pins and a crankshaft key. Where is a good place to order? We tried All-jet but just keep getting voicemail. Aaron

It all started when I bought a Riva ported 760 cylinder. Then later I found a 5mm stroker crank. I just got it all bolted together this weekend. One of the guys at our shop helped me polish the stator covor to a mirror finish. The FP exhaust manifold is too rough and oddly shaped to get the same...

I lost my crankshaft key. Well, technically I put it in a safe place so it wouldn't get lost....then forgot the place. Anyone know what size it is? And can I grab one at a local auto parts or hardware store? Thanks, Aaron

I'm ordering a MSD Enhancer for my 99 RN. I'm building a 62T big bore stroker for my 99 RN. I have a 650 6m6 parts motor that I'd like to grab parts off of to avoid disassembling my 62T 701 currently in my 99 RN. I read somewhere that the flywheels don't interchange between a 6m6 and a 62T. Is...

13 x 4 inch tires. I was thinking: lay it on it's back, cut off the toe plate, add some 2x4's to the rails to act as bunks and voila. Are the tires too narrow to work in the sand? Harbor freight has 6" wide tires for $25 each. My finished masterpeice would look like this (haha):

A couple friends and I are planning on going to this years TX Motor Surf. I've never ridden in the surf, neither have they. We are fairly new to stand-ups (but we do have SUPERJETS). What stuff should we plan on bringing? Toy hauler RV or tents? Spare skis? (I have an extra bone stock SJ)...