x-2 repower
- Thread starter Motorheads5
- Start date
dbrutherford
Parts Whore
- Location
- Fairmont, WV
I have seen it done before. just curious what it looked like on a WB Limited chamber. they do not have a stinger fitting at all on them. So I need to have one welded on to run water to. I don't want to cook my waterbox hoses. I have done that in the past... ski runs liek crap breaking in all that smoke!
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
YEAH there we go I drilled out the stock waterbox 12-3/8" holes in each baffle level that's about as good as it's gonna get I think. after reading some other post's I don't want it too loud.
dbrutherford
Parts Whore
- Location
- Fairmont, WV
I have a notion to have a custom water box made... After looking at my Coffman and Factory pipe, all I need is an aluminum tube. Just put some baffels in it and plenty of places for water hook ups.
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
is your's really loud now? I sure like how the stock waterbox fit's of course I still have the stock foam in the front also.
ive been around a few and tried the weastcoast on mine. it was ok, its loud, but not horrible. will ran the mariner factory whatever box and with front exhaust was loud as hell!!! it would make your ears ring after a 5 minute ride lol
here is an example of the whatever box
YouTube - Trial run on the new X2.
Last edited:
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
Damm loud is good also haha
we are kinda trying to stay under the radar here to much tourist activity ya know
we are kinda trying to stay under the radar here to much tourist activity ya know
WFO Speedracer
A lifetime ban is like a lifetime warranty !
- Location
- Alabama
I don't feel so bad about mine now,yikes!!
mfg:
mfg:
SXRguyinMA
Life's a beach
- Location
- Leicester MA
yea thats loud! motor looks sweet! Nice job!
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
ok so the stinger mod on the limited chamber that is for cooling right, however it should also help with noise, and the other question is what about running a pressure valve or whatever you call it so no water is going in the stinger until it hit's a higher r.p.m.? I read something about this.
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
what horsepower do you think this motor will be at ?:Eyecrazy:
WFO Speedracer
A lifetime ban is like a lifetime warranty !
- Location
- Alabama
I say about fiddy.
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
OH NO:Eyecrazy:
dbrutherford
Parts Whore
- Location
- Fairmont, WV
Stock 94/95 X2's had 52 hp. 92-94 Single carb small pin 750's had 60 hp. Both are according to the service manuals.
SXi Pro big pins were 75 hp. 750 ZXi's were 85 hp and 800 SXR's are 80 hp... all stock...
I would say you will be at least 70 tp 75 hp.
SXi Pro big pins were 75 hp. 750 ZXi's were 85 hp and 800 SXR's are 80 hp... all stock...
I would say you will be at least 70 tp 75 hp.
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
woohoo now that's more like it this thing should ripp:bananapowerslide:
WFO Speedracer
A lifetime ban is like a lifetime warranty !
- Location
- Alabama
Scared you didn't I ?
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
HAHA well I would have to say that you would know better than myself but yeah I was hoping for around sxr-800 power or so,:naughty:
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
Yes I'm old, but still rippin it, going backy on Saturday if the surf cooperates. Run single screens in them.
Attachments
Last edited:
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
YEAH THAT IS COOL
single screen's gotcha. well we'll be seeing you before to much longer