World Finals Pro and Amateur hull/engine combo list

[Roo]

I had a great time.

Met a lot of people, and put a lot of "faces to names".

My observations:

Lee Stone - Eme Q8, PowerFactor drivetrain
Rick Roy - Rickter hull, PowerFactor drivetrain (same as EME's)
Rick Roy's Russian (Mike Ecklish?) - Rickter hull, PowerFactor drivetrain (same as EME's)
Stoyer - Superfreak Carbon Hull (Tem) + XScream 1000 (not the standard 1000)
Pat Bogart - Superfreak Carbon Hull (Tem) + XScream 1000 (not the standard 1000)
Ski Clinic guy (Kessler) - WDK hull, WDK motor
Lenzi - his unqiue hull (only one there), PowerFactor drivetrain
Japanese guys - all on Bun hulls with Bun motors

The Trinity/Kommander (rider: Josh Lustic) did not compete. Drivetrain problems and an injury. Matrix hull + Dasa 1000cc setup (built by Kommander).

 

[SuperJETT]

I figured Lustic's was a 16mm big bore?

 

[CARBONX2]

I figured Lustic's was a 16mm big bore?

I think the stroke on his is 79,5mm(the most the stock cases can handle), it has the new DASA topend

 

[Roo]

I figured Lustic's was a 16mm big bore?

Nope - looking through my pictures, stock cases were used, making a 16MM not possible.

12MM perhaps, but I am pretty sure 10MM stroker / 90MM bore - 992CC.

 

[CARBONX2]

Nope - looking through my pictures, stock cases were used, making a 16MM not possible.

12MM perhaps, but I am pretty sure 10MM stroker / 90MM bore - 992CC.

Wasn't he running the Kawi/DASA PV motor?

 

[superramjet]

I heard rumors of a powerfactor 1200 in the works, I saw some kawi dasa pv cylinders in the kommander booth figured that was in the matrix. I never saw the matrix, second time I went to finals and lustics trinity hull was nowhere to be seen. I was dissappointed as that was the hull I really wanted to check out.

heres one of the rickters

 

[800amsoil4u]

Lenzi's ski is a Polaris based 1105cc motor built by Mark Baxter.

 

[Roo]

Matrix / Dasa Drivetrain:

Rick Roy Rickter / PowerFactor Drivetrain:

Notice the gas tank. Great idea. Tried to buy one they had sitting there but they wouldn't sell it to me. Electronics and battery where tank normally goes. In the picture Superramjet posted, they made a waterbox for the PowerFactor exhaust system for the area they ride in (to loud).

 

[superramjet]

i wonder what that gas tank comes out of

 

[The Penguin]

windshield washer reservoir from a truck?

 

[superramjet]

it almost looks like that, i saw one out of the ski, looked like a real skinny hydrospace tank. the drive shaft goes through the center

 

[Idok]

I like the main ground to the front cover...surf style!

 

[ATS_Aaron]

Any guesses on the foam/plate between the F/A's and the carbs?

Aaron

 

[Matt_E]

Keeps water out, looks like a great idea.
I'll try that.

 

[Roo]

i wonder what that gas tank comes out of

Nothing... it is a Rick Roy Product. They had one sitting there they were calling a prototype. kept bugging them to sell it to me, they would not.

Keeps water out, looks like a great idea.
I'll try that.

Yes, I will be doing the same! Last thing I need is water ingestion in a 1K motor.

Any guesses on the foam/plate between the F/A's and the carbs?

Aaron

Matt is correct - keeping water out.

 

[SuperJETT]

Any guesses on the foam/plate between the F/A's and the carbs?

Aaron

freestyle sponges.

 

[Roo]

Maybe I didn't understand Aaron's question correctly...

Material used was 'Turf.