What are these called?

Chris024

Chris024

Location
Phoenix, AZ
What are these types of wire connectors called? Bought a used msd enhancer for cheap, wired it up correctly according to diagram and I get spark but ski (650SN) won't start up. I want to go through and re-terminate the wires but I can't find these connectors. I've searched Amazon for "marine disconnect wires" but no dice. Don't wanna use different connectors in case I wanna go back to stock.

Image of stock cdi for reference.
TIA20220315_193923.jpg
 
S

Storbeck

Location
Minnesota
Search various combinations of bullet connector oem yamaha and you'll find them. Be a little careful because I think but I'm not certain that different japanese oems used different sizes.
 
JetManiac

JetManiac

Stoked
Site Supporter
Vendor Account
Location
orlando
In stock at JetManiac. The special oem boots seal to wire and to each other also.

JM Electrical Parts -Ebox,Starter,Bendix,Flywheel,Stator,Start/Stop,Solenoid,CDI, MSD

JetManiac's Electrical Parts Shop Find almost any electrical part to build or repair your ski right here. High quality new, used, and rebuilt OEM yamaha parts. Buy with confidence, JM parts are professionally inspected and selected, and even used parts are covered by JetManiac's satisfaction...
www.x-h2o.com
 
WFO Speedracer

WFO Speedracer

A lifetime ban is like a lifetime warranty !
Location
Alabama
Last edited:
Chris024

Chris024

Location
Phoenix, AZ
JetManiac said:
In stock at JetManiac. The special oem boots seal to wire and to each other also.

JM Electrical Parts -Ebox,Starter,Bendix,Flywheel,Stator,Start/Stop,Solenoid,CDI, MSD

JetManiac's Electrical Parts Shop Find almost any electrical part to build or repair your ski right here. High quality new, used, and rebuilt OEM yamaha parts. Buy with confidence, JM parts are professionally inspected and selected, and even used parts are covered by JetManiac's satisfaction...
www.x-h2o.com
Click to expand...
how do i order from you? I think I'd also like to get some connectors for the start/stop switch as well
 
Sparkplug

Sparkplug

Location
Red Bluff CA
Pinning bullets is cool and all. But time is money for some. You can buy pre made connectors for 1 to 30 pin plugs. Water tight. No crimping bs nothing. You solder it to the wire and shrink tube it. Done. Both my skis stators are done that way and work great. Looks much cleaner than a bunch of bullet terminals also.

Sent from my SM-G970U using Tapatalk
 
Chris024

Chris024

Location
Phoenix, AZ
Sparkplug said:
Pinning bullets is cool and all. But time is money for some. You can buy pre made connectors for 1 to 30 pin plugs. Water tight. No crimping bs nothing. You solder it to the wire and shrink tube it. Done. Both my skis stators are done that way and work great. Looks much cleaner than a bunch of bullet terminals also.

Sent from my SM-G970U using Tapatalk
Click to expand...
good to know i'll keep that in mind, but for this i think soldering them in would take just about as long as crimping them, there's only 7 on there.
 
S

Storbeck

Location
Minnesota
Sparkplug said:
Pinning bullets is cool and all. But time is money for some. You can buy pre made connectors for 1 to 30 pin plugs. Water tight. No crimping bs nothing. You solder it to the wire and shrink tube it. Done. Both my skis stators are done that way and work great. Looks much cleaner than a bunch of bullet terminals also.

Sent from my SM-G970U using Tapatalk
Click to expand...
What multi pin connectors do you like to use and where do you get them? Im always up for learning about nice clean wiring tips.
 
You must log in or register to reply here.
Top Bottom