I have tried to search to see if anyone posted a "how to" in order to install DaKine (or other brands) of footholds on their WB1, but didn't get any hits. Has anyone done this, and if so can you advise how to anchor the straps to the footwells. I am a little nervous about simply bolting them on; I am not sure if that would be strong enough. I know the best spot to place them are in the rear part of the footwells where they start to rise to the rear tray. If anyone can offer any advice or some pics, I would appreciate it....or even a link to a DIY somehwere.
WB1 footholds
- Thread starter Jetaddict
- Start date
WaveDemon
Not Dead - Notable Member
- Location
- Hell, Florida
I know for a fact this used to be in the tech faq but I couldn't find it...
http://www.x-h2o.com/threads/7713
let me know if yo need any help.
http://www.x-h2o.com/threads/7713
let me know if yo need any help.
WaveDemon
Not Dead - Notable Member
- Location
- Hell, Florida
michael950
for me to POOP on!
- Location
- Houston, TX
Last edited:
LBE
Eddie Would Go.
- Location
- Charlotte, NC
I used a coarse threaded screws on the oustide of the straps because you can't get under there to put on bolts (because of foam). For the inside bolts I took out the batery tray/box and put some large fender washers with bolts so theay are really secure.
Don't forget stainless steel.
Jetskier79 recently moved his to the base of the "rise" in the tray, not on the flat part. I'm sure he will chime in.
Don't forget stainless steel.
Jetskier79 recently moved his to the base of the "rise" in the tray, not on the flat part. I'm sure he will chime in.
WaveDemon
Not Dead - Notable Member
- Location
- Hell, Florida
