stock 38's question

[brylon644]

How many turns out is the max you can go with the high speed needles? These are stock mikuni 38's on a 62t motor.

 

[Crab]

don't go more than 2 turns, if that won't do it jet up.

 

[mr.fixitman760]

Usually 2 3/4 is absolute max, 3 turns out and the screws practically fall out

 

[JetManiac]

don't go more than 2 turns, if that won't do it jet up.

Usually 2 3/4 is absolute max, 3 turns out and the screws practically fall out

What they said! Jet up if you much more than 1 1/2-2 turns.

 

[mr.fixitman760]

After jetting I would suggest putting the screw setting at 1 1/2, that way you have room to adjust in either direction

 

[brylon644]

Ok I went out two and a half turns. Guess its time to jump up a size