ok, so doing a few mods to my SN and have it all buttoned back up. got it started briefly and then buttoned up the e-box and put it back in....went to run on the hose and would only run for a couple of seconds. When I try to start it it will sputter every several rotations and IS igniting something, but it just will not fire up and stay running.
One of the upgrades is an MSD enhancer and a reworked JSS coil. I've checked for spark and it seems to have spark. I've swapped in a different coil and a different cdi with the same results. I'ts got new oem start stop wiring harness and I've also tried it with the black/white wires disconnected
Could this be a stator issue? the ski ran last year, but had not been started this year.
any feedback would be appreciated.
Thanks,
hbski
One of the upgrades is an MSD enhancer and a reworked JSS coil. I've checked for spark and it seems to have spark. I've swapped in a different coil and a different cdi with the same results. I'ts got new oem start stop wiring harness and I've also tried it with the black/white wires disconnected
Could this be a stator issue? the ski ran last year, but had not been started this year.
any feedback would be appreciated.
Thanks,
hbski