SkiNaked's RN Superjet Build

[SkiNaked]

Ok. This thing has been years in the works. Unfortunately. I have been deployed 26 of the last 32 months in support of OIF and OEF. I have been gathering the parts and sending to Blowsion Kolors the last few years. Well I am getting ready to redeploy in July and plan to pick up my completed ski in August. Here is the build list I have been working on.


Motor, electrics and pump,
lamey cylinder (84 bore)
epoxied cases,
ADA girdled head.
MSD Enhancer
RAD Charging Flywheel
R&D Intake
Duel Novi 46's
Hot Products Fuel Rail
V Force Delta II reeds
External fuel pump on carbon fiber mount
Tru Ceti Flame arrester with outerwears
Factory B Manifold and Head Pipe
TNT Blaster Chamber
Yamaha Factory Aluminum Waterbox
Blowsion Duel fuel pickup with internal fuel filler
Blowsion aluminum battery box
Blowsion Joe Kenny Keepers
Blowsion Freestyle Pump cone
Blowsion Tilt System
Impros Hooker prop

1997 Round nose Hull (Full out Blowsion Bling Bling Paint scheme).
Entire hull and tray reinforcement
Blowsion Footholds (Clowners)
Blowsion Tubbies IIs
Blowsion Joe Kenney Two hand hold hood and nose.
Advance Metal works Pole (-2)
Blowsion Billet pole bracket
UMI Steering system
Blowsion pro finish one way valve kit and install
ODI Ruffan 90mm grips (All thuged out with thug plugs etc).
Blowsion billet throttle lever and Tilt lever
Blowsion Pole rope
Blowsion Carbon Fiber Pole Pad and cover
Blowsion Hand pole spring
Works Intake Grate
Blowsion Carbon Fiber Ride Plate.
Blowsion duel stainless bilge bracket
2 x 500 gallon rule bilge pumps
Blowsion bilge switch
Blowsion SXR hood latch
Blowsion fuel block off
Blowsion billet hood hooks
Hydro Turf Mat and rail kit

Thats all I can think of right now. Will also post a couple pics of the ski prepped for paint. Sitting in the shop. Waiting on John to get back from his Memorial Day weekend and start spraying.

 

[SkiNaked]

Pics of the hull prepared for paint.

 

[SkiNaked]

Deleted pics of JSU motor since I purchased the lamey below (Edited)

Novi 46 Carbs.

 

[SkiNaked]

TNT Chamber and IMPROS Hooker Prop

 

[SuperJETT]

Ok, now we got some pics to talk about.

That Hooker impeller reminds me of a 550 impeller turned into a swirl.

 

[SkiNaked]

Ok, now we got some pics to talk about.

That Hooker impeller reminds me of a 550 impeller turned into a swirl.

Have had the Hooker in my hands yet. Dave at Impros mailed it directly to Blowsion for me. I am still in Afghanistan. Hopefully the guys will get some more done on my ski this week or next. Send me some new pictures to post. The majority of pictures have been the pictures sent to me when I purchased the parts and from the shop as they get stuff done.

 

[Big Kahuna]

what does that prop start out as??


Hey Chris, you may want to talk to Pat about running his pole with the blowsion bracket. I know Tom had some issues with XMetal Pole and WDK bracket.

 

[SkiNaked]

Roger. The guys at Blowsion are all over it. The good thing is the ski is being built there. So they can make any of the mods to either the bracket or pole that are needed.

 

[SuperJETT]

what does that prop start out as??


Hey Chris, you may want to talk to Pat about running his pole with the blowsion bracket. I know Tom had some issues with XMetal Pole and WDK bracket.

It's new, search for Impros hooker, Dave explains it.

 

[SkiNaked]

Well. See what getting board and hanging out on the X will do to you.

Just purchased the Lamey from NORCAL to go in this ski.

 

[norcal ex]

hey, nice engine! :fing02:

 

[SkiNaked]

The seller sure was a jerk. but I am glad to finally get my hands on one of the famous Lameys that every raves about.

Oh wait. I can say that until you send it to me. :doh:

Thanks again!

 

[SkiNaked]

Motor arrived at Blowsion. Whoo Hoo. I will be riding this beast in just under 2 months. (Still have to make the trip home from Afganistan).

 

[Mike W]

Well. See what getting board and hanging out on the X will do to you.

Just purchased the Lamey from NORCAL to go in this ski.

I know exactlly what you mean. 8 months in Iraq and I spent way too much time on here. Spent alot of money as well.

 

[SkiNaked]

I have been deployed 35 months over the last 5 years. Including 26 of the last 31 months. Did Iraq in 2003-2004, Kuwait 2005-2006 and now Afghanistan 2007-2008. Gotta love the Army.

 

[SkiNaked]

Well. I am flying home to Italy tonight. Ski should be about finished. Here is a picture i got back from Blowsion. They got my TNT pipe polished. Looks great.

I will be in Oregon to pick up the completed ski on the 8th. Will have tons more pics shortly after!

 

[norcal ex]

cant wait to see it done!!!

 

[oxnard111]

what does that prop start out as??


Hey Chris, you may want to talk to Pat about running his pole with the blowsion bracket. I know Tom had some issues with XMetal Pole and WDK bracket.

i know this is old, but what type of problems? I run an x-metal pole with a WDK bracket, haven't had any issues.

 

[wsuwrhr]

Keep your head down bud and take care of yourself.

I appreciate the job you do for all of us.

Brian

 

[yamaslut]

Well. I am flying home to Italy tonight. Ski should be about finished. Here is a picture i got back from Blowsion. They got my TNT pipe polished. Looks great.

I will be in Oregon to pick up the completed ski on the 8th. Will have tons more pics shortly after!

see ya out there....

btw - it's nice to see ya back on the site, thanks for your service bro