grezzmky
Suckin paint fumes
- Location
- Saint Louis MO
EVERYtime I get the hood under water I foul a plug. Has anybody sucsesfully mounted SN flamw arresters to after market carbs?
Sick and tired of getting water in my motor!
- Thread starter grezzmky
- Start date
steve-uk
Manners cost nothing
- Location
- Barrie - ontario
you mean a little like this?
http://www.x-h2o.com/threads/68987-New-Generation-Thrust-flame-arrestor-adapters
x2, decent hood seal and breather tubes correct length
grezzmky
Suckin paint fumes
- Location
- Saint Louis MO
have new OEM hood seal but the the breather tubes are gonna get looked at as well
I can't believe anyone would vouch for Pro-K's. I've had two sets completely disentigrate on me. The most recent were a set that was less than a month old! I had heard others say they fall apart, but figured that was b.s. until I ran them myself. Both of the plastic cones have fallen down onto my carb bells and caused the engine to basically starve itself for air while I was riding.
- Location
- Detroit, MI
Yeah the aftermarket hood is the best option... in the "old" days we blocked off the front air supply and created a new air supply near the rear of the hood -- this is possible if you can't get a aftermarket one anytime soon.
- Location
- Texas
Aftermarket SN hoods are very spensve, I'm going the cut and glass route on mine, I have 2 hoods so why not chop up one. There are some VERY good write ups too with picts. I need to find a cheap aftermarket SN nose piece.
SUPERTUNE
Race Gas Rules
- Location
- Clearwater Fl.
A stock SN hood is at least 85% of your problem!
grezzmky
Suckin paint fumes
- Location
- Saint Louis MO
I ride a RN with an aftermarket hood
SKI TILL I DIE!
YUMMMMMMMY
- Location
- daytona beach, fl
are you sure one of your gaskets arent leaking
What hood are you running?
I have Run Pro-Ks for the past few years with no problems, even on the 66E motor with shook like a harley.
Last edited:
grezzmky
Suckin paint fumes
- Location
- Saint Louis MO
I dont have a coupler cover and was wondering about it....
grezzmky
Suckin paint fumes
- Location
- Saint Louis MO
What gasket would cause water fo foul a plug then the ski goes under water??
stanton
High on jetskis.
- Location
- atascadero,ca
umm get a coupler cover!!
What he said......
nokfir
............
- Location
- Merrick NY
coupler cover is key!!!
i ran without it for like 5 min once and all my ski would do is bogg. get one asap. i have one if you want.
i ran without it for like 5 min once and all my ski would do is bogg. get one asap. i have one if you want.