short shaft questions

J

justride

Guest
How do I change out the bearings in the short shaft housing..
It's a 96+ superjet..
What tools do I need to do this, and what parts do I need to replace....

Thanks
 

T-bone

brraap....thats so 2002
its pretty simple, i jus built one, but you do have to have accsess to a press, pull out the seals and press the shaft out of the bearing and the pull the snap rings out then press the old bearing out and reverce it for install. remember to install the oil seal on the inbound side prier to the shaft.
 
J

justride

Guest
T-bone said:
its pretty simple, i jus built one, but you do have to have accsess to a press, pull out the seals and press the shaft out of the bearing and the pull the snap rings out then press the old bearing out and reverce it for install. remember to install the oil seal on the inbound side prier to the shaft.

Thanks,
That's what I was looking for.
Do I need to order new seals?
 
Y

yamaslut

Guest
justride said:
Thanks,
That's what I was looking for.
Do I need to order new seals?

definately get em if time is not an issue... they are cheap and easy to replace
 
Top Bottom