Foximus
CFL Cheapass.
- Location
- Oviedo, Fl
anyone over by seabring for ridin this weekend? Ill be there with a formula ford crew.
**Sebby - Oct. 13th & 14th**
- Thread starter Stricky
- Start date
jetrock
X-
- Location
- Fort Lauderdale
That five is gone. It's not the head. It's a milled stock head with OEM gasket...and it's tight. Checked it this morning. It might be the coil....or something else electrical.
It would ride out to the surf fine...as soon and I head north or south getting to the surf zone I would loose a cylinder...and it could never recover out there. By the time I get back to the bridge...or about 50 yards west of the bridge...it recovered...so I turn around and head back out...same thing happens...when I come back in...it clears back up. I don't freaking get it...yet.
The plug caps were cleaned and tightened. Even used some diaeletric (STFU) grease. I cut back the plug wires but it made no difference. Water wasn't/isn't an issue. Fuel didn't seem to be an issue. Lines are clean...no bubbles.
Again, to and from the surf zone...it ran great. Even going out through the channel it ran good...as rough as that was. But as soon and I turn north or south...within a minute....same dayum thing.
The biggest issue is testing...it only fails in those rough conditions and it's a bit difficult to recreate those.
So, next thing I'm going to do in pull and check the black box. Check my ground. Then check and clean all the connections then add some diaeletric (STFU) grease. I'll get a coil and see what happens next month in Sebby!!!
Life is good when one's testing hole is SEBBY:Banane25:
Stricky
**SoFlo Surf Sluts**
- Location
- Ft. Lauderdale, FL
Hey... one question sideshow bob... if we are "posers" and we CAN do tricks....what do you call someone like yourself who CAN'T? Wouldn't that make you a "poser, poser", just wondering? :scratchchin::Banane19:
Last edited:
stuntbikemike
Time to ride
- Location
- clearwater
Your only trick is sitting on the beach flapping yer gums.....couch rider
stuntbikemike
Time to ride
- Location
- clearwater
Can you say that in english.....cause i didn't see anybody else with two nice boats....I saw old guys riding old boats..:nutkick:.for One session.....:headbang:EWOk was representing way more than stickdyk and he was only there 1 day instead of 2....And saki i hope your wife is giving you a purse cause you need one for sure:headbang:
From now on will choose to ride with the younger, better looking crowd:shooter3:
stuntbikemike
Time to ride
- Location
- clearwater
Until you find what it is.....you don't know what it isn't.....but good luck
stuntbikemike
Time to ride
- Location
- clearwater
HOLY ******** SAKI'S IDOL
Boris
The Good Old Days
- Location
- The surf-less coast
Simmer down girls, when is the next ride ??
I'm thinking of cutting out my tray and doing the same thing that Slutty did with his REVs.
Will I have enough time ?
Need to order a bunch of materials, glass or more exotic materials, turf and padding, foam,.......or I'll just leave it as is and ride.:fing02:
I'm thinking of cutting out my tray and doing the same thing that Slutty did with his REVs.
Will I have enough time ?
Need to order a bunch of materials, glass or more exotic materials, turf and padding, foam,.......or I'll just leave it as is and ride.:fing02:
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
we do that EVERY sunday its nothing new
jetrock......Does your boat have an intact coupler? sounds liek you are tossing water up and into the carbs.....:naughty:
jetrock
X-
- Location
- Fort Lauderdale
huh...I know I'm new this this whole jetski thing but...I don't need to know what it is to know what it isn't. I mean...let's say I replace the coil with a known working coil and it still does it...at that point, wouldn't you agree that it's NOT the coil...? Sure you would...therefore you would know what it wasn't without knowing what it is. :smokin:
jetrock
X-
- Location
- Fort Lauderdale
Water isn't the issue Scott. I have the coupler cover in place with a stock FA. The hoses from the hood come all the way down and I run the bilge. It's not water.
I'm wondering about the fuel though. I have no petcock and run my lines straight to the carbs. From the tank, I have the reserve tube running to the carb...as opposed to the shorter "non" reserve tube....naw...that cant's be it...b/c it would recover...I don't know.
Stricky
**SoFlo Surf Sluts**
- Location
- Ft. Lauderdale, FL
NICE saki! The only thing this pic is missing is the nice baldy spot on top and the feaking bathroom rug on his back that sideshow has. Doesn't that MAKE you old? Remember this sideshow bob... you are coming to OUR rides on OUR coast...this is not the other way around....so we know you envy us!:Banane19:
Last edited:
jetrock
X-
- Location
- Fort Lauderdale
Don't have one to try...got one to sell?
Stricky
**SoFlo Surf Sluts**
- Location
- Ft. Lauderdale, FL
I got the stocker from the wetjet motor.
jetrock
X-
- Location
- Fort Lauderdale