Anyone install a scupper on a 2021 Krash footrocket? I ordered an rrp scupper flap. Does it look like it will work with the Krash setup? Do I need to remove that black ring on the hull? Or does it mount to that?
Scupper krash footrocket
- Thread starter Ben34
- Start date
DylanS
Gorilla Smasher
- Location
- Lebanon Pa
Great info here
I don’t believe the RRP scupper will fit into your black ring so you may need to remove it
How I do a scupper
I've had the exact same scupper valve for 5 years now, same rubber flap, etc. It barely leaks, has always worked well, etc. In the process of refoaming, I put a new tube in, used 2 street 45's to offset the inlet to under the intermediate housing, and just redid the outlet like I always have...
www.x-h2o.com
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Why not just order a replacement flapper?
Never came with a scupper. Just had a block off plate on it, which I took off. Might just have to make some adapters to make that work
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Just remove the ring and install the RRP Scupper, or try and XScream Scupper.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
You could also just measure the ID and order a Versa Plug and install it up in the scupper tube.
So I have to remove that outer black ring? The tube measures 1.9 something inches
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
To add a different scupper yes. Or order the Krash scupper that should fit there.
I’ll just take it off then since I ordered the rrp. Heat gun should help get it off?
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Yes.
I contacted Krash directly, they said if I took it off, it would not seal correctly and leak water in the tray. Can that rrp be installed with that on? If not do you have the link for a krash flap style?
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
No, you cannot install directly. I would go the versa plug route. contact PWCDoctor to see what he has that would work. It just bolts inside.
Bk, Jetmaniac shows a Versa for Krash in his parts thread. Maybe that’s it ?
New - 'Water Out' Shop -Bilge Pump, Scupper, Versiplugs, Hood seals, Billet outlets, hose, mounts, etc.
Bilge Pumps, Versiplugs, Scuppers, Hood Seals Keep the Water out of your ski! Bilge Pump kit 123.90 Rule Bilge Pump 360gph Rotary 3 position waterproof bilge switch Billet bilge outlet (black or silver in straight or 45 degree) Bilge outlet hose 2ft. Billet single bilge pump mounting bracket...
www.x-h2o.com
Yami-Rider
TigerCraft FV-PRO
- Location
- Texoma
Versa plug is the way to go
