- Location
- s florida
unclehulka13 said:
Sounds like me last year!:Banane01:
I just wanted to get a head start knowing how that time factor affects the stress levels:scared:
I see alot of late nights up ahead... get to work:headbang:
Riot Ride Build Off!
- Thread starter RonnyMac
- Start date
- Status
Sounds like me last year!:Banane01:
I just wanted to get a head start knowing how that time factor affects the stress levels:scared:
I see alot of late nights up ahead... get to work:headbang:
- Location
- Cleveland Ohio
Still workin on my hull.... damn that thing was beat!
- Location
- s florida
Wow! this thread has been very quiet:cool2:
let's throw a little trash around!!:Banane01:
let's throw a little trash around!!:Banane01:
steves buildoff ski is going to be heavy and slow like a constipated turd pushing its way to the bottom.
there.:biggrin:
there.:biggrin:
- Location
- Cleveland Ohio
Done glassin! One more sand and then time to prime!!!!! Paint Design Done... your all in trouble suckas... Look out for the KAW!!!!:woot::woot::woot::woot:
- Location
- s florida
sflsurfrider said:
Yo Charlie... your throwing dirt on the wrong side of the fence biatch!:bs2:
waterfreak said:
oh sorry, steve.... my bad.
the only two classes in this buildoff should be as follows:
ski(s) built from scratch
and the other should consist of all the other poor talentless suckers using OEM hulls.:Banane37:
- Location
- s florida
sflsurfrider said:
Now...that's a bit better:woot:
- Location
- Cleveland Ohio
Hey!!! It takes talent to make a 2.3 Ton Mack Truck into a Freeride Ski!:cussing::cussing::bsflag:
a freeride sxr is about as useless as a lenzi hull on a closed course.
this is fun.
okay, somebody else's serve.....
this is fun.
okay, somebody else's serve.....
- Location
- Cleveland Ohio
Hold on SFL... I'll reply back when I'm done hitchin your house up to my Honda and pulling it down to the boat ramps! You do live in Fla, right??:biggrin:
Hows that?:headbang::headbang::headbang::headbang:
Hows that?:headbang::headbang::headbang::headbang:
djkorn1 said:
now thats just ridiculous. how am i supposed to see your reply when my doublewide is floating downstream with the duck $hit?! hah?
i know you think its a honda because its so effing heavy, but its really an sxr. trust me.:headbang: :headbang: :headbang: :headbang:
- Location
- Cleveland Ohio
WOW! A double wide... go big or go home!
:biggrin:
:biggrin:
- Location
- Cleveland Ohio
You guys still wrenching out there.... or did you give up? :biggrin:
- Location
- s florida
Trying to figure out this whole custom painting thing!!:bling: :fest30:
- Location
- The D
maybe mine wont be as fancy as i originally wanted it to be, but it'll be one off thats for sure. Cant beat anything built by hand, from engine work to hull.
im working on a new improved destroyer mega-flop signature handhold thats gonna blow all your minds into little pieces.
- Location
- Cleveland Ohio
I am having a slight problem fitting my custom, hardcore, indestructible, carbon fiber, D-cut, dual scupper, -2, flux capasiter, front exhaust, 989cc billet, lightened, stroker, zero degree, 6.6litre ram air, freestyle sponge modification...
:bsflag::dunce::261::dance:
:bsflag::dunce::261::dance:
- Location
- Cleveland Ohio
There are also issues with the triple Canadian Air Filtration System (C.A.F.S.)
:frown:
:frown:
- Status