Re enforcing questiong for a SN

[SkiDiggity]

I am re enforcing my sn and i was wondering how to glass the nose on the inside if anyone has done this would you pls post pics?

Thanks,
Shane

 

[jetfreak78]

there is not much of the process to see on the pics. i used foam to form a flat area under the bracket. then glsed over it

 

[SkiDiggity]

that is just under the pole bracket right? what about up inside for the nose?

 

[oxnard111]

Shane, looks like the upper ribs can be ground down.

Also, once you get the handle pole bracket off, there will be a dip on the flat surface under the handle pole bracket. you'll need to cut that since it dips inward toward the inside of the ski... when the ski is upside down, you'll out a couple layer of masking tape over that whole and the center hole, fill it will filler and the lay glass over the filler.

 

[SkiDiggity]

yeah i am definatley going to need some help with that one lol i have the ski in newbury right now and i just found out that the bolts to the pad on the handle pole are both striped out i need a screw out set