Re: dome swap.

[mk1]

Guys , running an ada head with 37cc domes , b pipe and 46mm mikuni carb at the moment. Going to change to 35cc domes , will I need to re jet the carb , and will I need to replace the o rings on the head with new ones..? Thanks....

 

[SXIPro]

I would say no and no.

 

[mk1]

I would say no and no.

Thanks for the prompt reply SXIPro....

 

[JetManiac]

No on the rejet, and depends how old the orings are. The dome orings go bad over time. If you are using new domes, then new dome orings are included.

 

[Big Kahuna]

go to a power and rubber supply house (Hydrolic Hose store) and get them to order you some 043 Viton orings. They are cheap.