Pro tec trim system, help

[IceRocket1286]

Im using a wave raider/pro tec combo for my freestyle trim. I cant figure out how these stupid brackets mount on my pump so that the cable holder mounts in place.

I need some pictures of a pro tec trim system on a superjet if anyone has ANY, or any help.

 

[eschberg]

ttt... im gonna be gettin one soon, i could use the pictures also

 

[Freestyleriverrat]

I run this system with a blaster nozzel and it works great. You will need to bend the bracket a little to keep the nozzel from hitting it and limiting your trim up function. I mounted the cable to the reduction nozzel directly behing the cable mount. I am not only using the blaster reduction nozzel b/c that is what came with the system but b/c it is metal as opposed to plastic and will retaim more strength when borred and mounting trim stuff to it.

 

[kingnothing3]

do you have to have the spring on there? i thought the jet would naturally straighten the nozzle out?

 

[Freestyleriverrat]

do you have to have the spring on there? i thought the jet would naturally straighten the nozzle out?

It will but I just did the reverse of what this system was designed to do which is trim down. I have not tried it w/o the spring and am not sure I would want to. I like how it keeps the nozzel centered, however depending on the spring you use it may take a little more pull to trim the nozzel b/c you are not only working against the force of the water comming out of the nozzel but you working against the force of the spring itself. I just played around with different spring tensions and it all works out well. It gives nice throw also

 

[surfgy45]

wait a sec... a blaster/raider drop nozzle ring will fit the pro-tec pump set up?

 

[Freestyleriverrat]

It is a blaster reduction nozzel........everything else is for a SJ. It is a pro-tec system minus the pro-tec reduction nozzel.

 

[surfgy45]

oh, its not that maxflow nozzle set up? the reduction nozzle has the 4 spots for bolts build in (top and sides)

this is what im using and thought maybe i could use a raider trim ring? and thought thats what you guys were using

 

[IceRocket1286]

figured it out. weeeeee

 

[surfgy45]

ice, post some pictures of your set up. i want to take a little looksies