Porposing 750sx--Need help

[Bruins]

We have a 1995 750sx with a Jet Dymanic concave ride plate and a stock intake great. We are running the reduction nozzle without the angled shim, we tryed angling it up and down with no less porposing. So we removed it.

Can some one tell us how your 750 is set up to not porpose? We've riden in light chop and flat glass water, with out any change. Can some one give us advice. :frown:

 

[wydopen]

mine never porposed.....hull extensions if you arnt trying to make it a freeride boat...i had a worx dominator ride plate worx intake grate and the shim pointing down

 

[djkorn1]

You NEED an aftermarket intake grate on that ski. An extended rideplate will also help. Make sure your impeller is in good shape.

Besides that, it is mostly riding style.

Throttle control is the key along with keeping your weight forward. Keep riding and you will get better. How long have you had the ski?

 

[jeepmark4x4]

I used to have that problem in high school...than I gained 50 lbs.

 

[750SX]

I used to have that problem in high school...than I gained 50 lbs.

DO NOT DO THIS MOD!

hahaha j/k:haha:

 

[Prem1x]

Does it do it any more or less with a full or empty tank of gas?

 

[Dirtybird]

Learn forward and push on the pole, it really takes alot out of you. We just deal with it. Its the Kawi's 'nature of the beast' It sucks I know, but I was 175 last year and it did it. It sucks chasing a boat.

 

[jeepmark4x4]

Learn forward and push on the pole, it really takes alot out of you. We just deal with it. Its the Kawi's 'nature of the beast' It sucks I know, but I was 175 last year and it did it. It sucks chasing a boat.

Dirty is absolutely correct. Really the only way to scream on a big boat like that is to get your weight forward! Do not lean back or just stand in a regular position or you will get worked as you know. But once you can get the nose down those kawi's can rip!