Pipe bracket for guy getting ready for freeride
- Thread starter JetManiac
- Start date
- Location
- Marion, Ohio
That bolts directly to the stock head. Either going to have to swap it out for a stock head or make a custom bracket...
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
On a similar note, a guy posted on the FL jet ski swap shop that he broke the upper piece of his stock kawi 750 pipe and is trying to find a replacement in time for Daytona.
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
Then the ADA bracket that lets you bolt a stock pipe to a ADA head should work? or will the ADA adapter not work with that head / pipe?
Does it use lord mounts?
- Location
- central florida
It appears that the Protec pipe was designed to work with a stock head. The op shows a Riva head. Back in the day- when Hector was a pup- Riva had these adapters to work with their heads.
- Location
- Up side down
I have a stock head, but coming Thursday night...
- Location
- Canberra, Australia.
I've always been of the impression that these Pro-Tec pipes were optimized to mount to Pro-Tec heads using both mounting holes in that tab coming off of the chamber. They should align with the raised (and threaded) areas that are a feature of the Pro-Tec head. A search of images on the 'net appear to support this.
Probably worth scanning the 'net for images of this pipe mounted to a stock head. If it looks simple the stock head option would probably be the easiest/quickest/cheapest solution.
Probably worth scanning the 'net for images of this pipe mounted to a stock head. If it looks simple the stock head option would probably be the easiest/quickest/cheapest solution.
long beach local
long beach local
- Location
- Az
^ I had a mach II pipe and only 1 hole would line up with a 62t head . The ada bracket should line up 1 hole also i think providing its a little lower and you could shim with a washer.