new pics of THRUST innovations trims systems (formerly virgin waterworx)

[THRUST]

here are pics of the easy trim about 25 degrees of travel and the straight trim which gets about 35 degrees of travel
both are available as complete systems with reduction nozzle and steering nozzle . thrust trim kit for $495 and complete $625 new price 2008 .everything you need is there just have your trim tube installed and bolt up and go . the easy trim will be out for 2008 for redign but should be back in the future in race models down trim

 

[EvanB85]

Nice Work.

Innovation = :Banane01:

 

[oxnard111]

Nice Work.

Innovation = :Banane01:

Innovation = Happy Bananas?

J/K... The system looks good.

 

[Speedfreak]

Does the trim ring bolt directly to the existing holes in the reduction nozzle?
IS that a protec reduction nozzle?

Correct me if I am wrong I was just trying to break the price down. Which is a great price compared to some that I have seen

So for the $495 you get
Handle
Cable
Trim ring
Bracket
Cable mountings (either soft pull with pulley or Straight pull)

Then $100 each for
Protec steering nozzle
Reduction nozzle

 

[THRUST]

that is more or less correct . it is a yamaha wave raider reduction nozzle and a pro tec steering nozzle . either system is complete with out these and can be changed to either one with the purchase of a different cable and some hardware so if you have a straight pull and decide to change you spend $100 .
so the system includes for $495
trim ring
cable
lever/modified
trim arm and cable mount
bushings trim ring and steering nozzle
pulley hardware or straight pull
all mounting bolts
steering cable adapter

62t nozzle $100
pro tec nozzle slight modified $100

 

[THRUST]

note system could work with stock nozzle with tabs welded to it at the same spec as the 62t . But do not recomend using with the gp nozzle ,could work as well but dont recomend this set up .

 

[THRUST]

Thrust Innovations New pricing on complete system reduced $75 for 2008
you get everything you need to start doin flips except the skills for just over 6 bills .
call for details 561-281-3388

 

[SXIPro]

What size bore is that reduction nozzle?

 

[THRUST]

the reduction nozzle is 82mm but can be bored all the way to 87mm