my ol' bluski!

[brett]

post some pics of that cut rideplate

 

[sea-dude]

Damn that is almost a twin to my ski.
I just did limiting rope (Made my own), hood straps, and dual bilge pumps.
Motor is set up similar except for I have water injection and MSD, but no high compression head. Adding foot holds, turf, tubbies, and head next.

 

[stanton]

you may want to reinforce your stand with some cross members and diagonal supports also........

already been done, the structure is solid.. wheels no so much!

post some pics of that cut rideplate

actually didnt notice much of a difference. it gets a d cut and finish cut in the mill this week.(hopefully)

 

[wydopen]

stan i have another plate you can have..that jd plate really stick to the water (because of the concave) and its not what you want for surfriding..jfb used to run one but hes nuts..lol..i have a stocker and a protec..ill give you either..

 

[stanton]

my straps

motor with stock f/a

mod to get the f/a to with on a girdled head.(note clear plastic going below top of the head)

the only broken part on the ski.

 

[stanton]

stan i have another plate you can have..that jd plate really stick to the water (because of the concave) and its not what you want for surfriding..jfb used to run one but hes nuts..lol..i have a stocker and a protec..ill give you either..

once i "do the d" the concave will be almost all gone. im going deep, full 3"rad or more, i want this bitch to SLIDE!

 

[brett]

i told Cuong about what we did to make that stock f/a fit and he said all we had to do is buy a spacer!:banghead:

 

[stanton]

yea just BUY another thing! it was just slight modification.

 

[stanton]

the d cut on my jet dynamics ride plate.

before the cut

coolant spraying

the drop

finish pass

mounted
i fking love how this rides now! slides like a sj should.
:biggthumpup:

 

[GPnVB]

Very nice. I plan to cut my stocker, offering the service?

 

[stanton]

turf. came out good. did 2 layers on tray and top of gunwhales. i like.

 

[Crab]

Stan, I have that UMI bracket on here f/s, change it before it goes snap like mine did. Or get the complete hood kit, its sweet!

 

[stanton]

if i had the $ i would!!
great pic of me and the dogs

 

[brett]

if i had the $ i would!!
great pic of me and the dogs

that bracket is one weekend chillin at home with homies and riding in the mornings

 

[brett]

if i had the $ i would!!
great pic of me and the dogs

and the dogs! hope rachelle doesnt see that post, lol!

 

[stanton]

that bracket is one weekend chillin at home with homies and riding in the mornings

or two weekends of the homies chillin at the beach
and you had to quote it 2x :shhh:

 

[Crab]

or two weekends of the homies chillin at the beach
and you had to quote it 2x :shhh:

:hitwithrock::love:

 

[stanton]

so i sold my bike and my build is underway
getting the above umi bracket
Engine Keepers - Joe Kenney Design
Handle Bar Grip Complete Starter Kit - ODI Xtreme Black
UMI Throttle Lever - Angled Finger Anodized Black
3/8 inch std flow control valve
taylor curtis full reenforcement going with engine bay to the nose under the pole bracket and hood lip. MAYBE with cf nose cover..
cf handpole wrap

 

[Crab]

Stan, your bracket left here today, I would expect it tuesday or wed.

 

[stanton]

or not