My engine problems from last year

SuperJETT

So long and thanks for all the fish
Location
none
This was the result of a flame arrestor coming off last May, and one of the bolts plus some washers went through the engine. And this is what kicked off my year of barely riding...
 

Attachments

  • res_stuff3 038.jpg
    res_stuff3 038.jpg
    51.6 KB · Views: 200
  • res_stuff3 039.jpg
    res_stuff3 039.jpg
    41.9 KB · Views: 194
  • res_stuff3 041.jpg
    res_stuff3 041.jpg
    42 KB · Views: 186
  • res_stuff3 050.jpg
    res_stuff3 050.jpg
    79.9 KB · Views: 200
Y

yamaslut

Guest
damn.... nightmares are made from stories like that
:frown: :frown: :frown: :frown: :frown:
 

SuperJETT

So long and thanks for all the fish
Location
none
yamaslut said:
damn.... nightmares are made from stories like that
:frown: :frown: :frown: :frown: :frown:

Just a reminder to make sure your squarenose f/a's are tight. My front one came off. Ouch.

I'm not even going to go into the detonation problems after taking off my MSD t/l and using stock electronics with 3 degrees advance.

It was a bad year, I think I only rode 15 times TOTAL, and the last ride of the year (after Jersey) i broke my steering cable after only 10-15 minutes of riding, so my year was over!
 

Big Kahuna

Administrator
Location
Tuscaloosa, AL
Gee, thanks Darin, you trying to cause an omen for all of us......... been there, did that back in 03............. 04 and 05 were pretty good years......... cept for the broken nose........... stripped driveline 5 minutes after I hit the water at the Lanier (Riot Ride) last may............. see, there you go...........................................



pfffffft
 

waxhead

wannabe backflipper
Location
gold coast
it hard to know where our year starts and finished here as well ride all year around
opps sorry guys didnt mean to make you jealous
but i have just blown out my calf muscle so it over for a while for me
 
SuperJETT said:
This was the result of a flame arrestor coming off last May, and one of the bolts plus some washers went through the engine. And this is what kicked off my year of barely riding...


same exact thing happened to me late last seeason.......I had a missing bolt that I coudnt find for WEEKS...

turns out it was sitting inside the intake on the reed petals....ran that way for probably 2 months or so....took the intake off for something unrelated and...:scared:


motor is still running strong though (knock on wood)
 
Top Bottom