Imperer for SXR to do freestyle with

[matejzivic]

Witch is the best impeler to have to do freestyle with SXR 800.

I have:
factory dry fipe
r&d 27cc head
blowsion cdi
stock carb
prox 82.75 pistons
Trim 30degree nozzle bored 90mm
.
.
.

Now I have 14/19 skat trak imperer. Should I get 13/18 or lower?
What are you running with.

Thanks for some info...

 

[djkorn1]

I still have the stocker.

 

[kx454]

i got a skat 13/18 cut back 5mm and it works great. i rode a ski with a 9/17 swirl or something and that also worked very well.

 

[Bigfish]

9/17 swirl worked for me

 

[dual_carbed_650]

anybody have a stock impeller they want to get rid of pm me

 

[matejzivic]

Thanks. What means swirl?

 

[subnsxr]

9/17 here, works great for bottom end

 

[jMike]

think it might be worth cuttin back a 9/17? 3 or 5 mm? seems to work well now but there is always more to be had

 

[matejzivic]

I was lookin on skat trak site, but there it is not posible to buy 9/17 impeler.
Where could I bought it?

By the way I'm from Europe - Slovenia.

Thanks

 

[djkorn1]

If they don't have it listed under the SXR... get the SXIPRO 9/17 swirl.

 

[matejzivic]

If they don't have it listed under the SXR... get the SXIPRO 9/17 swirl.

Is this skat trak 9/17 swirl type any diferent from skat trak 9/17? What actually mean swirl?

Which should be solas impeler compared with this skat trak 9/17?

Is it posible that standard 13/22 Solas make better low end than 9/17 swirl?