i need the umi steering oring dash number

[2nd nature]

looking for the umi oring size .for umi steering . can someone help me out.

 

[Idok]

Jss

 

[2nd nature]

the cheapest i saw is 25.00 for his kit. an oring less then a dollar or could drive 20 minutes and get a free one..mine didnt come with one so have no way of knowing the correct size trying order one from mcmastercarr

 

[Idok]

hmmm, not sure the size....I did full rebuilds on mine...the kit comes with extra o-rings as well...

 

[2nd nature]

mines new just missing oring.thats the reason not wanting to do a completew rebuild.i guess ill call umi monday if i cant get it this weekend from someone.

 

[njfl]

This past summer I called UMI and asked for the UMI part numbers for #4 and #10 on the instructions for 96 and up SJ so that when I called back later, if I decided to buy them, I could give them. Sure enough, as I suspected, the part number included the dash number. I have them written down in my toolbox at home, but I won't be back for another week. I went to the local hydraulic supply store and bought a few of each of the two for less than $1.00 each.

Attached are the installation instructions from their website for 96+ SJ (they have others as well).

Alternatively, you can use Google to find size charts and use the ID/OD and crosssection diameter to figure it out. If this isn't resolved in a week I will post the dash numbers when I get home.

Good luck.

 

[michael950]

Post them so I can add them to the reference library.

 

[Mark44]

Measure it!!

Mark44