I like dual carbs.

[Legdragger]

Dave,
Legdrag's (Kevin) made them with SRE Scott R.... Enginering I forgot the last name for Scott but he works for NASA now so he really is a rocket scientist. They don't produce them anymore but they kinda look like the Chopper carbs Sato makes with the shower holes all the way around. They hit hard!


Kevin,
Haven't tested it but it is going in soon with a big hub SXR impeller. I think I might just get longer fasteners and try it this week.

 

[dbrutherford]

Sounds good.


My friend had an away message up saying "A dual major in Rocket Science, what the F%^& was I thinking?!"


She is majoring in Mechanical and Aerospace Engineering. So I guess she will be a rocket scienstist one day.


I am debating on buying a Novi 48 mm single for my X2 now.

I have a Kehin 42 I cam across, how well does a single 42 work?

DAVE

 

[D Slicker]

Dave, Go with duals.

 

[Legdragger]

Basically you get what you pay for. I ran a single 42 for a while. No complaints but no big power. Either go with a set of standard 44's off ebay (Got mine for $180) with a manifold or hold out for some Novi's Full Spectrums, Black Jack or SRE's( Got mine for $250) if you can get them. Try to get it off a kawi since the jetting will be way closer from the start. I got lucky with mine. It came off and 800 Kawi so it is super close right now.

Hot Products has the throttle shaft connectors and brackets you will need to get them working.

You can use stock Yamah single carb spark arrestors on standard mikuni's but you need Tau Ceti's for the Modded carbs.

 

[Crab]

i found my camrea crab and here is a pic off the 2 manafolds side by side so you can see the diffrence ,you can se the 750 manafold (bolted to the engine) angles towards the front off the ski alot more than the 650 one(im holding the 650) . im going to put the 750 wet limited wet pipe on my x2 and try it when i get my motor back soon so ill be able to tell you how they fit then . hope ive been some help . sorry about the tread jack pete

what brand was the 650 manifold, the hole looks big.

 

[w-nut]

what brand was the 650 manifold, the hole looks big.

it a pjs manifold crab the other one in the pic is the one that comes with the factory 750 wet pipe set up