Other I got traded a wonky Mod Chamber

[BrightE's]

@dabeetereater He did offer for me to send it to him, he'd cut it, and weld it back into place. But that's $$$ on shipping, and a week+ out. I'm just going to take the hit and do the labor myself, get it welded in town and cross my fingers that it's not trash afterwards.

 

[Roseand]

@dabeetereater He did offer for me to send it to him, he'd cut it, and weld it back into place. But that's $$$ on shipping, and a week+ out. I'm just going to take the hit and do the labor myself, get it welded in town and cross my fingers that it's not trash afterwards.

You have a carbon hull, total loss, a 155 mag, and a stroked tpe. Just get a freeken pfp and call it a day

 

[BrightE's]

You have a carbon hull, total loss, a 155 mag, and a stroked tpe. Just get a freeken pfp and call it a day

Send donations to A_Broke_Ass_Engineer@NoMor$$mail.com. Also a few chocolate chip rice crispies wouldn't hurt the cause

 

[Vumad]

I think it was used with a different manifold, not a different head pipe. I think that chamber would line up with a kawi 750 manifold and head pipe. I run a 650 manifold to get my 750 head pipe to fit into my X2 as the 750 manifold clocks it into the hull. It lines up pretty nice with my SJ limited chamber. I think that the 750 manifold would point the head pipe exit pretty straight in the hull.

750 with incorrect manifold, my limited SJ chamber lines up

750 headpipe with matching 750 manifold. Points straight, would probably line up with OP chamber.

 

[BrightE's]

You're prob right Vumad. He either knew what he had or he didnt.

But it racks my brain to think someone couldn't realize they had a hybrid Kawi/Yami mix-up that allowed this chamber to work in a Superjet. Hell, if someone knows the different between a Mod and a Limited b-pipe (which he clearly did from all his post history), you know darn well they know the difference between a Kawi and Yami FP system.

It reeks intentional to me. That or complete negligence, which shines its light no brighter.

 

[SterlingSilva]

The fact that he sent you pics hiding the welds says it all. Shady

 

[Freakrider]

I suggest you start drinking heavily !

 

[jetx]

http://www.x-h2o.com/index.php?threads/part-out-built-b1-blaster-fl.153975/#post-1683811

Here's where your chamber came from...wasn't from a SJ that's for sure...even says it was modded to fit the blaster

 

[just joe]

I say keep the positive attitude, use this opportunity to upgrade. Your ski is too nice for that pipe, it's cancerous.

Call Wamiltons and get this on the next truck out. It doesn't cost $500. It's price is $500, resale $400 so it's true cost is only $100. I use that logic on me all the time

 

[Vumad]

Or sell the old piece of poop pipe for the $40 grand the damn things are going for and buy a PFP. Us poor people need your scraps.

 

[BrightE's]

Or sell the old piece of poop pipe for the $40 grand the damn things are going for and buy a PFP. Us poor people need your scraps.

My fiancee would end that party snappy like some kind of rain cloud on a sunny day. It would be the long time kind of hurt too where she knows I f*cked up, and then I know I f*cked up, and then I'd have to cook dinners for like a month to work it out, but in the end would be super happy about the pipe.

It would only be like the chairs at the wedding that would have to go right?

Sent from my VS980 4G

 

[BrightE's]

I say keep the positive attitude, use this opportunity to upgrade. Your ski is too nice for that pipe, it's cancerous.

Call Wamiltons and get this on the next truck out. It doesn't cost $500. It's price is $500, resale $400 so it's true cost is only $100. I use that logic on me all the time

That's a valid point and not a half bad motive to keep on keeping on by.

Suppose I'll look around...




Sent from my VS980 4G

 

[BrightE's]

Also thanks for all the support y'all. Getting burned hurts, but now it ain't so bad

Sent from my VS980 4G

 

[just joe]

My fiancee would end that party snappy like some kind of rain cloud on a sunny day. It would be the long time kind of hurt too where she knows I f*cked up, and then I know I f*cked up, and then I'd have to cook dinners for like a month to work it out, but in the end would be super happy about the pipe.

I think it's supposed to be like that sometimes. Think about it, moments of tension replaced by a month of your treating her to dinners, learning how to cook, pampering her, showing how much you respect her... and you both will be happier in the end.

You have to do, might as well it get a pipe out of it

 

[Jetfiend]

Get the PFP and never look back, it would be a crime to put that scrap chamber in such a beautiful ski. Also a good way to let your fiancé know how it's going to be.

 

[Lumpy]

let your fiancé know how it's going to be.

^^^^

 

[cudaben]

Damn, That sucks. Need to hit the guy up. I got burned on a trade several years ago..... Wont do that again unless I personally know the person.

Interested in selling it?
I'm almost never on this site but @ pwctoday all the time. Mayne we can work something out?

You have a carbon hull, total loss, a 155 mag, and a stroked tpe. Just get a freeken pfp and call it a day

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[DAG]

I though this board was only for "stand up" people

 

[MADMAT]

http://www.x-h2o.com/index.php?threads/part-out-built-b1-blaster-fl.153975/#post-1683811

Here's where your chamber came from...wasn't from a SJ that's for sure...even says it was modded to fit the blaster

Well that clears any doubt....a hole right there.

 

[BrightE's]

Interested in selling it?
I'm almost never on this site but @ pwctoday all the time. Mayne we can work something out?



Sent from my SAMSUNG-SM-G870A using Tapatalk

Maybe, I'm going to see if I can find a used PFP pipe first.