GP1200R wiring schematic or service manual?

[OCD Solutions]

I need a schematic for a 1999 GP1200R if anyone has one. I'd like a link to somewhere i can download a full manual if someone could PM me please.

 

[Boris]

Are you sure it's for a 99 GP1200R and not a 99 GP1200 ???
The 99 GP1200R is a rare beast indeed (only 50 built) but they do pop up from time to time.

Anyway, all that info is over on Greenhulk.net .

 

[OCD Solutions]

very possibly, I'm doing research for someone elses ski. I don't have a membership over there and you need a membership to do searchs.

I could follow a link though if someone was nice enough to post one. :sneaky:

 

[Boris]

Here's a link to a 97 to 99 GP 1200 service manual
http://www.mattmans.com/greenhulk/yamiyds/gp1200.pdf

You need one for a 2000 and up GP1200R than here it is.
http://greenhulk.net/forums/attachment.php?attachmentid=66702&d=1207788111

 

[OCD Solutions]

Thanks Boris, that was the ticket.

 

[QuickMick]

I believe the GP has no power valves. GPR has power valves. Easy way to tell the difference. Other than two different hulls.

 

[OCD Solutions]

I believe the GP has no power valves. GPR has power valves. Easy way to tell the difference. Other than two different hulls.

Both have powervalves and the same hull, it's the GP760 that doesn't have power valves. Anyways none of that matters. I'm just looking to see if a multifunction gauge from a 99 GP800 will work in a 99 GP1200.

 

[vomitspot]

the gauge should be the same
j

 

[OCD Solutions]

the gauge should be the same
j

Yamaha specs two different part numbers though.

Only difference I can see from the wiring schematics is that the GP1200 unit has 4 extra wires. Two wires, (gy and R/B) form a jumper at the display and don't go anywhere except together, and the other two go inline with the start/stop switch, (R and R/Y). The GP800 has a CDI unit like a Superjet and the start/stop are tied in there.

I know I can rework the harness to make it work, the question is, can my potential buyer do it, or is he comfortable with me doing it? I just want the parts gone, i don't need to open myself up for returns or any liablity.