- Location
- amarillo ,tx
Nice what paint u use
FX-1 FX-1 build
- Thread starter Joker
- Start date
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
PPG shopline
Acrylic urethane.
is pretty tough.
Acrylic urethane.
is pretty tough.
Last edited:
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
VXSXH20
Sionis Industries
- Location
- Mid-Atlantic
Looks good joker, the red turf tends to fade quickly so keep it out of the sun or covered when not riding or storing it. Lets see that pump and driveline from the bottom! Wanna see that nozzle setup too! Looks good!
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
Alright I will grab some pics on a few. But I'm going to try soaking it in spf 50. But I plan on returfing it this winter.
Btw that blowsion spring needs to stop being so springy.
Btw that blowsion spring needs to stop being so springy.
Last edited:
- Location
- amarillo ,tx
Yeah blowsion spring made my stock rn pole stand straight up
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
I got her all done. Maiden voyage was on Sunday. She ran like a raped ape. I loved it. It was a huge jump going from a js300 to a fx1. I had a lot of fun on Sunday until my start stop switch went out. I ended up taking it all apart and finding the problem.
Attachments
VXSXH20
Sionis Industries
- Location
- Mid-Atlantic
So you shimmed the rear pump in the undertray, rather than build up the surface level w glass and resin? Wanna make me some I have yet to get my itch on..
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
On the inside I layed down 4 layers of 12 oz biax and 2 layers of 1.5 oz chop strand. And on the outside I bedded the shims in resin/ cabosil/ microbalLoons mixture to lock then in.
- Location
- Lake Orion
what jets are you running for the pipe?
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
Idk. I bought the carb with the pipe.
VXSXH20
Sionis Industries
- Location
- Mid-Atlantic
Still lookin for a pipe jack? I thought you were eying That red pipe!?
- joker I like the shim idea, did you grind down the front as recommended? What did you use to grind out the shoe area? My dremel took a dump and and considering other options
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
I used a metabo with these sanding discs. I also used an air grinder with flap wheels. And then I ran into problems with the steering cable being too long so I had my dad make a bracket to move the mount back. Also if you do this swap. Find a sx/sxi/sxr prop. You can set the pump back the 3 mm or whatever it is so you can run those props. It is easier then having to ship to impros and pay $75 a prop. Plus there are tons of props out there for those skis.
Attachments
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
Btw don't use a dremal you would be here for days
Last edited:
- Location
- Jackson MI
I need to fix mine and we need to meet up so I can ride one of these!
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
Ya that's what I'm thinking. I want to ride your fixed steer
- Location
- Brigantine, NJ
By moving the nozzle pivot further back, you change the geometry and the steering will be unequal from left to right. The cable attach point needs to be in the same plane as the nozzle pivot points. Running an X2 tilt nozzle will make the stock cable the perfect length (and give you trim)........just fyi
- Location
- Jackson MI
Deal.