wildman326
Who else?
- Location
- Kansas
Do full spectrum carbs need to be initially designed for freestyle? Or can any pair be set up to work?
full specs
- Thread starter wildman326
- Start date
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Ed builds them as pairs or tripples.
- Location
- Jersey
do you already own a set or looking to purchase
either way call ed brazina @ full spectrum and he will tell you how to set them up for your application.....
i know matt_E and a few others have had good success with calling him and getting there set-ups dialed in almost perfectly
either way call ed brazina @ full spectrum and he will tell you how to set them up for your application.....
i know matt_E and a few others have had good success with calling him and getting there set-ups dialed in almost perfectly
wildman326
Who else?
- Location
- Kansas
Sorry, what I meant was will a race pair work on a freestyle boat? Work well.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
hard to say, when he sets them up, he sets them to the specs of what they will be intended to be used. if you know who bought them originally, call him, he may tell you to send them to him, or something as easy as "Hey, I soldered closed one of the circuits, open it back up", he did this on one of tricky's first sets, had a circuit closed.........
waxhead
wannabe backflipper
- Location
- gold coast
What if you decide to put them on a different boat
wildman326
Who else?
- Location
- Kansas
Therin lie the questions: are they all basically similar, so a small modification could sway them one way or the next?
Or so obscenely different that a small modification will do little or nothing?
Or so obscenely different that a small modification will do little or nothing?
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
when he builds these carbs he builds them for a specific application...... sometimes to change that it may be as simple as drilling out where he soldered say one of the 4 pilot jets where it sprays into the throat of the carbs.
- Location
- Cheney lake Kansas
why wouldnt you just call Ed and ask him?
:dunno:
:dunno:
W
wydopen
Guest
x2
- Location
- Pueblo, CO
I've talked to Ed about this and it does have to do with epoxying & drilling some pilot holes to a specific size...
x3
- Location
- Jersey
x4 look @ post #3
wildman326
Who else?
- Location
- Kansas
Good idea.
wildman326
Who else?
- Location
- Kansas
Well I won the full specs on ebay today (sorry) and I guess I'll need to call ed when I get them.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
be sure to find out if that guy is the original purchaser, Ed may have the notes still on the setup.
- Location
- Jersey
when you get them, call ed, tell him what you are running and i am betting once he gives you the set-up over the phone, you won't touch those carbs unless you have to rebuild the motor
wildman326
Who else?
- Location
- Kansas
I do plan to find out if the guy was the original purchaser and to contact ed!! Can't wait.
I'm sure he will want you to send them in for an update. These are an older set. BMR