Fuel line replacement

[ozzo098]

I'm in the process of cleaning up the motor on my ski and want to replace all the fuel and cooling lines. I noticed there is a larger line that goes into a Y fitting then splittibg into two smaller lines which go to the carbs. Most of the cooling lines look to be old and chafed pretty bad. There is also a primer installed with smaller lines. Can anyone help me out with correct line diameters for this setup? I will also be replacing the fuel filters, any recommendations besides stock?

Cooling?
Fuel- large and small?
Primer?

Just want to make sure I have the best setup that won't starve or flood the carbs.

It's a 96 by the way.

Thanks!

Sent from my Nexus 5X using Tapatalk

 

[vomitspot]

fuel is 1/4
cooling is 3/8
primer is 1/8

 

[///M3]

Out of curiosity, did you buy the ski in that condition?

 

[ozzo098]

Out of curiosity, did you buy the ski in that condition?

Yes, why? It runs strong, and it's just dirt on the motor.

Sent from my Nexus 5X using Tapatalk

 

[///M3]

Yes, why? It runs strong, and it's just dirt on the motor.

Just wondering. Btw the colored fuel lines typically harden after a season or two, look for oem style fuel line.