first time truffing... how did i do? (56K be warned)

[dieseltwitch]

I know it looks dirty thats because i had a gelcoat dust every where and got it all over the place. there is a bit of a learning curve to this stuff. i started on the left side rail and worked my way around. learned some good tricks for next time.

Here you can see where i really jacked up. this was the very first peice i have ever done. so.... yeah like i said learning curve

I wasnt done cleaning up every thing but i just wanted to show the cut in for the fuel control

 

[cdubb]

Id be happy with that,,not to bad for a first turf job.

 

[D-Roc]

looks good for being sideways. :haha: what a newbie :biggthumpup: (i kid i kid.)

 

[gj_fx1]

whats the black stuff in the seams?

 

[WaveDemon]

whats the black stuff in the seams?

it looks like gorilla glue.

the turf you wrapped under the tray in the back will probably pull away.

 

[MADMAT]

Looks fine. That was just loads of fun wasn't it?

 

[SXIPro]

Good Job. When it comes time to re-turf mine, I gotta find a friend that will turf for beer, because I would totally f%ck it up.

 

[dieseltwitch]

it looks like gorilla glue.

the turf you wrapped under the tray in the back will probably pull away.

Thats a black silicone just around the edge to clean it up

 

[douglee25]

it looks like gorilla glue.

the turf you wrapped under the tray in the back will probably pull away.

I second that. Cut it flush with the back of the tray because you'll risk loosening the rest.

Doug

 

[dieseltwitch]

on the back bottom it cut flush with the way i have the glass cut under there. so its not going to get riped off by the jet. i took great care in making sure that doesn't happen

 

[C-Rock87]

That doesn't look like a newbie turf job to me..good work :smile:

 

[dieseltwitch]

hey thanks! i took what learned from you guys so. really thank you guys

 

[Mike W]

Not bad for a first timer. You get better with every one you do.

 

[Dirtybird]

The TRUFFING looks good :haha: