Super Jet Engine Assembly

Half flip95

Formerly pondracer95
What are the tips and tricks that aren't in the manual?

Starting with crank case / top end assembly.

I will definitely be working slow and following the manual as this is my first complete rebuild of a yamaha pwc engine
 

Quinc

Buy a Superjet
Location
California
Make sure you have a good torque wrench! If not start with a real low torque setting and slowly work your way up. Stripped 1 bolt and broke the head off another with an HF one.. Worse 9$ I ever spent. :(
 

Half flip95

Formerly pondracer95
20130906_003032.jpg

I have the two coupler side seals both with spring facing out of the cases towards the coupler.

edit. just saw your post. i had the seal with the 4 tangs on the inner groove. i thought it was like a buffer to keep the spacing correct
 
Last edited:

Half flip95

Formerly pondracer95
there is no mention or picture of them in two manuals I am looking at. then in the third manual it shows picture that looks like it has them although there is no mention or identification.
 
Top Bottom