Blaster Electrical issue any advice

[RedlineMulitia]

Blaster with 61x, had a bad exciter coil on the stator, bought a good stator from a running ski from a forum member and replaced. Problem is now that I've replaced stator I've checked all connections twice but ski will not do anything when hit start button, tried cleaning start stop plug connection and still nothing, ebox has new msd enhancer, jss coil, and relay.

 

[OCD Solutions]

Check the oem fuse and holder. They can be fussy sometimes.

Do you have a multimeter?

 

[RedlineMulitia]

Have a buddy who I can borrow one from, I'm a machinist I'm ok with electrical but the fuse is new, I should try another from the heck of it, I wanted to change it to a blade style but I'm not messing with it bc I have this problem now

 

[Byeai]

Switch start and stop plug see if it works

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

 

[Fro Diesel]

Check grounds in ebox

sent from Fro Diesel using tapatalk2

 

[DAG]

Did you get a 61x or 62t replacement stater?

 

[RedlineMulitia]

61x stator out of a runnning boat, I guess I could swap out start stop switch from my gpr, and I'll check the grounds again I'm thinking of running a separate ground to the intake.

 

[Scraggly]

I could send a stock cdi if you don't have one to check with. I had my msd do that to me before. Mine ended up being one connection not fully seated. Those bullet connectors can be a pain sometimes when your working with short wires.

 

[RedlineMulitia]

Ok I've solved the issue the fuse connection was bad so I mad up a new line, now that I has the ski running motor seems to hit a rev limit so to speak at 1/4 to 1/2 throttle, I've checked rev limit on enhancer and it is set at 8000 as stated from factory , is it just me? I am running ski out of water with no load on pump.