DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
lol, it pretty much cost $10 to ship them, I'd debating on hanging onto them for now. May end up going in the gfs ski
DAG's 2010 Black Betty Build
- Thread starter DAG
- Start date
vitalikol
Jetski-Snowboard
- Location
- Pennington,NJ
Let me know if you want to sale them
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
Came across my new turf color,, hoping I can do it in Diamond.
http://hydroturf.com/images/black_green.jpg
http://hydroturf.com/images/black_green.jpg
Last edited:
- Location
- Fayetteville, Ga
they cant do it in molded. only cut. I got that in cut diamond and its gorgeous.
- Location
- Raleigh NC\Lake Jordan
I needed to get my sunglasses for that
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
was it worth it? :love:
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
As an update:
After giving Hydro Turf a call, the two tone turf is $120 per sheet. I was planing on the lime green and light blue in diamond. The bill was pushing $300 so went the $90 route and tried their Black B-Stock molded diamond as this will be my first turf job. I'm bound to phuck up $120 sheets. I'll be picking it up Sunday, and plan to have it on before next weekend.
After giving Hydro Turf a call, the two tone turf is $120 per sheet. I was planing on the lime green and light blue in diamond. The bill was pushing $300 so went the $90 route and tried their Black B-Stock molded diamond as this will be my first turf job. I'm bound to phuck up $120 sheets. I'll be picking it up Sunday, and plan to have it on before next weekend.
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
Before paint i want to get the bottom deck back in decent shape. I went ahead and added a thin layer of Aerosil-Cabosil and epoxy to the bottom to help fill in the voids from beaching it. Also filled in the bondline around the outside lip and added a thick layer on the back chine where it was warn down (however, dont think its going to last to long..)
Bottom deck truing
Filling the Bondline
Back Chine
Weather Pack connectors came in so bullet proofed the 5point harness and both the start/stop's. I did not use their crimp tool and it still turned out nice, it was tedious.
Bottom deck truing
Filling the Bondline
Back Chine
Weather Pack connectors came in so bullet proofed the 5point harness and both the start/stop's. I did not use their crimp tool and it still turned out nice, it was tedious.
- Location
- Raleigh NC\Lake Jordan
looking good. I RREALLY need to do that to my stator wires. it would make taking the engine out\ebox out so much easier.
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
Shaping the 25m Underpad. I decided not to go with the plush since reviews have it a bit harder to work with.
I went in and made a pocket to help lock in the toe. Adding full 25mm around the toe cap's perimeter and had 10mm throughout.
Had some left over 25mm so softened up the gunwales.
and for a sponsor photo:unitedstates:
I went in and made a pocket to help lock in the toe. Adding full 25mm around the toe cap's perimeter and had 10mm throughout.
Had some left over 25mm so softened up the gunwales.
and for a sponsor photo:unitedstates:
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
One Piece Turf
Molded around holds with heat
Heat Gun will be your best friend
Low Profile 2lb Extinguisher
Easy mount, nice and secure.
Only 10" tall
Molded around holds with heat
Heat Gun will be your best friend
Low Profile 2lb Extinguisher
Easy mount, nice and secure.
Only 10" tall
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
Finally Done
...well I'm never done
Body Photos
Engine Bay
...well I'm never done
Body Photos
Engine Bay
- Location
- Raleigh NC\Lake Jordan
whhat paint did you use?
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
Note that when I took the body pics we were building cornhole boards so there was dust everywhere
but i used 7 coats of this
but i used 7 coats of this
Last edited:
- Location
- Long Island
wow thats awsome looks great
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
The oneway vent is built into the cap itself, its the size of a pin hole.
I've ran that tank for 2 seasons this way, love it!
I've ran that tank for 2 seasons this way, love it!
- Location
- Raleigh NC\Lake Jordan
every get any crap from the cops on your letters? Well I dont even know why im asking, anything is legal in sc!
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
I've been running them for 4hours (today)
I've just been riding w/o numbers, the cops really dont care down here. The numbers are 3" and practically block. I'm sure they can find something illegal about them. no issues yet
I've just been riding w/o numbers, the cops really dont care down here. The numbers are 3" and practically block. I'm sure they can find something illegal about them. no issues yet
DAG
Yes, my balls tickled from that landing
- Location
- Charlotte, NC
Actually got pulled over last weekend. They did not say a thing about the letters. They did take a hard look at the extinguisher. Its ABC but not USCGA, but it had them fooled and i got off scotch free. (with a warning for not having a whistle, lol)
Also the paint on the bottom deck when I've been rolling off cruisers and landing 3/4 had all been blown away. I did not prep the bottom deck as well as the top. I'll try again with the epoxy black, if it blows away again i'll switch to something else. Alot of people have had good reviews with the stuff. maybe they just dont ride hard?
Also the paint on the bottom deck when I've been rolling off cruisers and landing 3/4 had all been blown away. I did not prep the bottom deck as well as the top. I'll try again with the epoxy black, if it blows away again i'll switch to something else. Alot of people have had good reviews with the stuff. maybe they just dont ride hard?
Last edited: