Cutting hull question - angled or 90degree?

[SXR-FOREVER]

Whats better? Cutting the hull at an angle or cutting it straight up besides the fact you can reuse the back of the hull if you cut it straight up.

Thanks..

 

[Legdrag's]

Straight. make it easy.

 

[eastbay]

i did my sxr 90! plus you can still run a scupper in the back!

 

[Goose]

do 90 cause you can add hull extentions then if you arent happy with it

 

[LIVE2RIDE Powersports]

im thinking of doing my fx-1 that way. would that be to squirlly?

 

[SXR-FOREVER]

I'm looking at my ski and think that if I cut it at an angle I'll miss the back rideplate mounts so I may go with that so I dont have to remount the mounts and redrill my rideplate..

 

[FL-cracker]

im thinking of doing my fx-1 that way. would that be to squirlly?

Not a good idea. IMO

 

[Idok]

im thinking of doing my fx-1 that way. would that be to squirlly?

an fx is already 4" shorter than a SJ...

 

[LIVE2RIDE Powersports]

alot less work for me... i already have a trim nozzle, so that should be enough huh?

 

[yamanube]

alot less work for me... i already have a trim nozzle, so that should be enough huh?

LOL enough for what?

 

[LBE]

LOL enough for what?

No kidding!, what do you wanna do on the FX?

 

[ANT]

just an honest question but what does cutting the back of the hull do on the sxr? is it to make it come out of the water easier or what? cause when i had an sxr i honestly couldnt notice the difference between an extended worx rideplate and a stock rideplate cut even with the back of the hull, the front end is so heavy.

 

[LIVE2RIDE Powersports]

No kidding!, what do you wanna do on the FX?

everything and anything that i can learn.... until i get ******d up:crutches:

 

[thegoldenboy]

Don't think like that, negative energy = negative results.

You're going to be throwing backies on that bad boy.

 

[stanton]

I'm looking at my ski and think that if I cut it at an angle I'll miss the back rideplate mounts so I may go with that so I dont have to remount the mounts and redrill my rideplate..

what way are you going to cut the angle? i think you got it backwards

 

[eastbay]

I'm looking at my ski and think that if I cut it at an angle I'll miss the back rideplate mounts so I may go with that so I dont have to remount the mounts and redrill my rideplate..

if you want it to be 2in or more than you will need too cut at a angle so you dont have to remount bolt holes!
mine is just shy of 2in!

 

[SXR-FOREVER]

if you want it to be 2in or more than you will need too cut at a angle so you dont have to remount bolt holes!
mine is just shy of 2in!

yea I traced it out the other day and it will just miss the back ones if I cut it at an angle

have any pics??