Philip Clemmons
Owner, P&P Performance
- Location
- Richmond, Va
So how are you guys mounting them that have moved them to the center with a small tank?
Center battery mounting options
- Thread starter Philip Clemmons
- Start date
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
i made up inserts of my own....it fits right between the 5 gallon tank and the front cover..although the anodizing on the cover has been worn pretty good..
look at my avatar, the batt is wrapped in camo turf..
it works even better in an fx with stock tank..
look at my avatar, the batt is wrapped in camo turf..
it works even better in an fx with stock tank..
snowxr
V watch your daughters V
- Location
- Waterford, MI
I made a battery box that bolted to the front of the motor.
Philip Clemmons
Owner, P&P Performance
- Location
- Richmond, Va
Did you glass in the inserts? Not following 100%
Running a small tank though..................
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
I used acorn nut style inserts....placed them, then took a lid from a can of spray paint and cut out the top of it which gave me a plastic cylinder..taped around the base of the cyl so it wouldnt spooge out..
I then "potted" the inserts in filled epoxy resin
works great!
use the bulkhead option and a smaller battery in the REV......its only a PITA if you use an oddysey
Might work out a bit expensive for you guys but its made from billet and looks the nuts.
Chris http://www.airtimeproducts.co.uk/index.php?act=viewProd&productId=19
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
goddammm you guys make beautiful parts.....why o why do you not have a US distributor!?!
Thanks for that, I think the reason for not having distribution over there is price and shipping costs, the dollar is always less than the pound which works well for parts coming from you to us but gets quite expensive when we sell to you. Its expensive manufacturing over here and I am not about making cheap rubbish. In the meantime we will always sell direct.
Chris.