Case damage

Q

QuickMick

Guest
What the Hell did this?? I did find a chip in one of the bearings and the piece that came from the bearing in the bottom of the case, Is this case reuseable??
You can see the chip in the crank bearing in the 5th picture.
I guess I need to send the crank in to be rebuilt. Who should I send it in too?
:):):):)... :):):):)... :):):):)...

DSC04039.jpg

DSC04040.jpg

DSC04041.jpg

DSC04042.jpg

DSC04043.jpg

DSC04044.jpg

DSC04045.jpg
 
Q

QuickMick

Guest
vomitspot said:
the dowl is missing and the ring is chattering
Click to expand...

yes the dowl was loose and it FELL OUT.. so is this from the roller bearings going out?
I think its from the piece of chip that must of viberated around the center piece for quite some time.
 
#ZERO

#ZERO

Beach Bum
Location
Florida - U.S.A.
The centering pins for the bearings still appear to be intact and it looks like the vibration from a failed bearing chewed up your cases.

If you're going to reuse the cases I'd install a new crank with some bearing Loctite in that area.
 
Q

QuickMick

Guest
#.0 said:
The centering pins for the bearings still appear to be intact and it looks like the vibration from a failed bearing chewed up your cases.

If you're going to reuse the cases I'd install a new crank with some bearing Loctite in that area.
Click to expand...

I have a spare 61x on the shelf. I guess I will steal that bottom end and use this one on a stock setup. Yes I plan on having the crank bearings replaced on this crank.
I guess its better to have caught it now then when it took out my cylinder and pistons.
 
Q

QuickMick

Guest
#.0 said:
If you have a spare set of 61x cases, why not use them together?
Click to expand...

That is what I am going to do. I said Im going to have this crank rebuilt at a later date and set it a side.

If your talking about the cylinder?? I want to keep my cylinder I have been using.
 
Q

QuickMick

Guest
motorheads5 said:
Thanks I am wanting some for mockup
Click to expand...

what kinda mock up? I have a set of 62T cases with a crank in it all froze up nice and tight. Some D ick let it sit full of water for no telling how long. the bottom case has a hole.
 
Motorheads5

Motorheads5

Livin the generation gap
Location
ketchikan alaska
QuickMick said:
what kinda mock up? I have a set of 62T cases with a crank in it all froze up nice and tight. Some D ick let it sit full of water for no telling how long. the bottom case has a hole.
Click to expand...
lmao I am intrigued about this x-2 yami issue. I would like to do this conversion but I still am not all that convinced that the 701 is so superior, I also am not knocking yami and there 701. I do have some idea's, it's not a priority because I am doing a polaris x-2 conversion this winter with a buddy of mine he is building the motor and most if not all the mechanical. I will do all the hull mod's and paint. This is a x-crab boat! :hail:
 
Q

QuickMick

Guest
xeon said:
damn sorry to hear about your luck there. i hate to hear about bottom end problems. it scares me
Click to expand...

Thanks Xeon. I got another set of cases like new.. and even a crank but the previous ownder said it might be a SBT crank.... I dont want a SBT crank in my sj. I have read people on here have had good luck with sbt, but I just dont want to use it in my sj without knowing.
 
You must log in or register to reply here.
Top Bottom