Buried

Matt_E

Matt_E

steals hub caps from cars
Site Supporter
Location
at peace
So.....it occured to me yesterday that the PNW winter is coming to a close, fast. :banghead:

I have slightly less than 4 weeks now to get my ******** together for the Long Beach freeride (March 23-25).
Let's see......
My Roundnose:
-Got to finish the foothold swap. I cut out one of the old holds. I still need to get the other out, install the REV's, and returf.
-I was going to install a dual breather XMW bracket, but I don't think I have the time (it's single right now)
-I need replace one bilge pump


Squarenose:
-I need to finish that dam hull. That means fixing the pump shoe, building a nose, fitting the XMW bracket and FX1 pole, install a one way valve, close the back up, refoam, modify the hood.
-I need to tear the engine apart, port the cylinders and cases, install a pipe, and tune. Oh, gotta turf, too.

Misc
-I need to build a 760 Frankenstein that will be my Surf Motor (since I really don't want to dick around with my current Roundnose motor and total loss - I'd rather just have complete drop-in)

I will need to spend at least a couple of days tuning my setups and Phill's setups. Probably Snackem's setups, too.

And next weekend, I got 1000 sqft of laminate flooring to install,and another 120sqft of tile.
And in between all that, I need to find a couple hours for my job and school. :arms:

But hey, I do it for the children. :biggthumpup:
 
Snackem

Snackem

Danger Zone
Location
Colfax WA
Matt_E said:
So.....it occured to me yesterday that the PNW winter is coming to a close, fast. :banghead:

I have slightly less than 4 weeks now to get my ******** together for the Long Beach freeride (March 23-25).
Let's see......
My Roundnose:
-Got to finish the foothold swap. I cut out one of the old holds. I still need to get the other out, install the REV's, and returf.
-I was going to install a dual breather XMW bracket, but I don't think I have the time (it's single right now)
-I need replace one bilge pump


Squarenose:
-I need to finish that dam hull. That means fixing the pump shoe, building a nose, fitting the XMW bracket and FX1 pole, install a one way valve, close the back up, refoam, modify the hood.
-I need to tear the engine apart, port the cylinders and cases, install a pipe, and tune. Oh, gotta turf, too.

Misc
-I need to build a 760 Frankenstein that will be my Surf Motor (since I really don't want to dick around with my current Roundnose motor and total loss - I'd rather just have complete drop-in)

I will need to spend at least a couple of days tuning my setups and Phill's setups. Most importantly Snackem's setups, too.

And next weekend, I got 1000 sqft of laminate flooring to install,and another 120sqft of tile.
And in between all that, I need to find a couple hours for my job and school. :arms:

But hey, I do it for the children. :biggthumpup:
Click to expand...


I'm touched that you though of me:biggthumpup:
 
Mark44

Mark44

Katie's Boss
Location
100% one place
You just thought of this? LOL

I refoamed added drains new footholds scupper valve trim system and turf and reeds on Katie's ski and mine got new front exhaust outlet. I will replace the bottom tray turf and pad also pull the motor and elec. just to check things out.


Mark44
 
Mouthfulloflake

Mouthfulloflake

ISJWTA member #2
Location
NW Arkansas
I feel your pain brother.

my list is similar, except im taking classes as well, 2 out of 3 cars are down for service, im busy as HELL at work, sons needs my help building his pinewood derby car for next weekend....

Not to mention the 2 boats I need to paint, and engines to build... my only goal is to have them done by april or so.



Matt_E said:
So.....it occured to me yesterday that the PNW winter is coming to a close, fast. :banghead:

I have slightly less than 4 weeks now to get my ******** together for the Long Beach freeride (March 23-25).
Let's see......
My Roundnose:
-Got to finish the foothold swap. I cut out one of the old holds. I still need to get the other out, install the REV's, and returf.
-I was going to install a dual breather XMW bracket, but I don't think I have the time (it's single right now)
-I need replace one bilge pump


Squarenose:
-I need to finish that dam hull. That means fixing the pump shoe, building a nose, fitting the XMW bracket and FX1 pole, install a one way valve, close the back up, refoam, modify the hood.
-I need to tear the engine apart, port the cylinders and cases, install a pipe, and tune. Oh, gotta turf, too.

Misc
-I need to build a 760 Frankenstein that will be my Surf Motor (since I really don't want to dick around with my current Roundnose motor and total loss - I'd rather just have complete drop-in)

I will need to spend at least a couple of days tuning my setups and Phill's setups. Probably Snackem's setups, too.

And next weekend, I got 1000 sqft of laminate flooring to install,and another 120sqft of tile.
And in between all that, I need to find a couple hours for my job and school. :arms:

But hey, I do it for the children. :biggthumpup:
Click to expand...
 
Phill

Phill

v Check out Little Matt_E
Location
Kennewick, WA
Matt_E said:
So.....it occured to me yesterday that the PNW winter is coming to a close, fast. :banghead:

I have slightly less than 4 weeks now to get my ******** together for the Long Beach freeride (March 23-25).
Let's see......
My Roundnose:
-Got to finish the foothold swap. I cut out one of the old holds. I still need to get the other out, install the REV's, and returf.
-I was going to install a dual breather XMW bracket, but I don't think I have the time (it's single right now)
-I need replace one bilge pump


Squarenose:
-I need to finish that dam hull. That means fixing the pump shoe, building a nose, fitting the XMW bracket and FX1 pole, install a one way valve, close the back up, refoam, modify the hood.
-I need to tear the engine apart, port the cylinders and cases, install a pipe, and tune. Oh, gotta turf, too.

Misc
-I need to build a 760 Frankenstein that will be my Surf Motor (since I really don't want to dick around with my current Roundnose motor and total loss - I'd rather just have complete drop-in)

I will need to spend at least a couple of days tuning my setups and Most importantly Phill's setups. Probably Snackem's setups, too.

And next weekend, I got 1000 sqft of laminate flooring to install,and another 120sqft of tile.
And in between all that, I need to find a couple hours for my job and school. :arms:

But hey, I do it for the children. :biggthumpup:
Click to expand...

Snackem said:
I'm touched that you though of me:biggthumpup:
Click to expand...



Fixed that for you Snacko
 
You must log in or register to reply here.
Top Bottom