Super Jet Boyessen intake with V force 3 reeds

[PAVLOS]

Hi I need some help here
I just recived my boyessen intake that im using with 2 new 44mm carbs and along with that I grabed the Moto tassinari Vforce 3 reed system
My issue is that the intake has the gap on the inside for the stock reed cages so far so good,but with the vforce3 that bolt on the cases it leaves a gap between the cage and the intake how do I get that right ???? some spacer ???its my first build and Im gonna be asking lots of that kind of stuff

 

[550headache]

i'm just guessing but you probally have to run boysons with the boyson intake

 

[PAVLOS]

Well thats true, finally got it all sorted out you can use vforce3 reed cages with stock intake and some other a/m intakes that have a flat mounting surface for my boyessen intake I need rad valves or older vforce2 reeds that have the same shape as stock reed cages so they can mount in the gap of the intake,that way the whole intake it self acts like you are using a spacer cause cages bolt on further in than oem position.

 

[timverhey]

This is the way i did it as i had new vforce 3 reeds

 

[customride0105]

V2 reeds....minor work need to make it work just port match the intake to reeds...i ran this set up

 

[PAVLOS]

View attachment 196621 This is the way i did it as i had new vforce 3 reeds

Nice work done there !!! I also thought about that but then the cage goes to far in the case ,dosent that inerrupting the upward flow???

 

[550headache]

where do you guys get the vforce 2 reeds? my reeds are original 1994 and was thinking about upgrading om my fx-1 with the 61x.

 

[PAVLOS]

where do you guys get the vforce 2 reeds? my reeds are original 1994 and was thinking about upgrading om my fx-1 with the 61x.

Right here bud http://www.x-h2o.com/threads/...32#post1094232

 

[JetManiac]

where do you guys get the vforce 2 reeds? my reeds are original 1994 and was thinking about upgrading om my fx-1 with the 61x.

Unfortunately, no VForce reeds are available for 61x, but carbon tech make some nice ones for 61x.

 

[D-Roc]

They won't fit on 61x case motors bud.