last summer we had a lot of rain and were able to go adventuring in some creeks that are connected to the lake we ride on. after getting too confident I came flying around a corner and smoked a small tree with the front bumper. Now its time to fix this screw up. I work at a boat factory so I have plenty of resources to help me with the fiberglass repair, but I'm not sure how to handle the fact that the bond line is broken. do I have to try to split the cap and hull or is my best bet to glass is all together from the inside? i have also considered using something like the 701 industries bolt on rocker kit to reinforce the bumper. any suggestions?
Blaster Bumper Damage
- Thread starter lthays
- Start date
- Location
- Eugene, Oregon
Glass it in or CarterB rocker just depends on what you ride. 701 closed up don’t waste your money there.
Quinc
Buy a Superjet
- Location
- California
Grind out all the cracking so you can see how far and deep they go. Reinforce one side, fill the gap with thickened epoxy and reinforce the other side. I have the 701 rocker and the way it works would not add any reinforcement. Maybe it would help as a bumper though? 