billet parts

[njfl]

both good ideas
i am not sure how to get the twin carb plate to work as the studs for the manifild would come up at the same place the as the studs for the carb unless you were to modify manifold
i will have a think on it

I tried to get that accross in my text, but I can be a little roundabout with wording.

Use bolts with a tapered head and taper the plates to allow them to mount flush.

On the bottom plate, attach it with these.

For the top plate, make the stud out of one of these (tack it to the plate) in the same fashion, but upside down.

Joe

 

[waxhead]

i will look into it
its a great idea
i understand waht you are talking about
would you be happy to redill the manifold

 

[njfl]

i will look into it
its a great idea
i understand waht you are talking about
would you be happy to redill the manifold

I wouldn't mind redrilling it, but if there were a direct bolt-on way (without removing the intake assembly from the motor, it would be even more attractive easy upgrade that the average guy could do.

 

[custom rider]

to try for other stuff that not MANY people make
wax racing has no plans to make scuppers ,K&n adaptors or bow eyes

Things which we have in the plans are

Heads
Total loss
Cylinders
Drive shafts
Couplers
Lowered Pole brackets
Steering systems
We are also looking at a some other things but thats a bit down the track

We had a meeting last night and were discussing products as well our vaules

I will not let us make anything that i would not feel happy suporting so no siongle carb manifolds

I can help you with some tech info on the heads you are going to made.
I work on a CNC machine here in Denmark and I have made heads like the Riva but not in 2 pices. Contakt me if you want..

 

[MADMAT]

I don't know if it could be billet or where it could go but how about some cheap little thingamajiggy that us SJ owners can plug our plug caps into when cranking the motor. Like the SXR's have.

As I understand it, this is what causes our MSD's to fry out.

Anything yet? I really don't ever want to buy another enhancer if possible:irked:

 

[waxhead]

buy an inferno ignition
you dont have to worry about he enhancer frying then

No on that part we havent started anything
we are to busy working on the stroker cranks and the heads at the moment

 

[Big Kahuna]

I don't know if it could be billet or where it could go but how about some cheap little thingamajiggy that us SJ owners can plug our plug caps into when cranking the motor. Like the SXR's have.

As I understand it, this is what causes our MSD's to fry out.

just stick the plugs in them and ground them.

 

[waxhead]

what he said will work well
irs always good practice to ground plugs

just make sure there isnt fuel around other wise
sparky sparky bang

 

[brentR]

id take a blaster steering!

 

[waxhead]

yeah i am sure you would
there is alot of work in a blaster steering
and i dont think its worth the hassle for the amount we would sell
but if it gets to the point we i get some made i will post on here

 

[WaveDemon]

id take a blaster steering!

werd :biggrin:

 

[MADMAT]

just stick the plugs in them and ground them.

I know. Thats just a pain in the arse though when your a 1 man crew trying to wrench and crank and..........:cussing:

 

[h2odesperado]

some aftermarket company or SOMEONE needs to make grounding caps for the plugs that mount to the block. It doesn't look like it would be too difficult, probably inexpensive too. I just don't get how the SJ has been around for 16 years and no one has put them on it.

 

[yamaslut]

Billet:
I would like to see a billet version of the X-Metal pole. Not the body, but the top and bottom pieces that are welded to the extrusion... I assume that would be stronger than cast... not that I have had an issues, but it would be a nice addition, or upgrade to the pole..

 

[RoyalFlush@PCB]

Billet:
I would like to see a billet version of the X-Metal pole. Not the body, but the top and bottom pieces that are welded to the extrusion... I assume that would be stronger than cast... not that I have had an issues, but it would be a nice addition, or upgrade to the pole..

I think Paul told me that Pat himself was looking into this. Don't know if it's a "one-off" thing or if Pat may be planning on upgrading his poles in the process. :sneaky:

 

[yamaslut]

I think Paul told me that Pat himself was looking into this. Don't know if it's a "one-off" thing or if Pat may be planning on upgrading his poles in the process. :sneaky:

hmmm... have not heard that... that would be kick ass :Banane01:

 

[sprocketq]

the parts you talk of the billet pole bracket with hood latches built in and the adjustable stearing for different bars and the billet ended poles have all ready ben done by ATP in the uk www.queenfordjetski.co.uk

 

[yamaslut]

the parts you talk of the billet pole bracket with hood latches built in and the adjustable stearing for different bars and the billet ended poles have all ready ben done by ATP in the uk www.queenfordjetski.co.uk

That FX-1 is sweet.... cool mod to the handpole bracket and sweet pole